Nitewulf98

Found this interesting and thought I would share,

2 din radio bezel print plan,
https://www.thingiverse.com/thing:2194376 by 7thDarkAngel

2 din reversed radio bezel print plan,
https://www.thingiverse.com/thing:2281726 by 7thDarkAngel

ALDL cover plate,
https://www.thingiverse.com/thing:877520 by veaceonee

Armrest screw-cover oval, doorhandle round version, seat track cover,Fuel injection emblem inlays for doorhandles for GTA by HasseO
https://www.thirdgen.org/forums/inte...-printing.html

A huge to all those that put in so much work and were willing to share.

I will update with new locations as they arise.

Looks rough, but might just be the printer quality and that is what sand paper was made for. Now I have a good excuse for the wife so I can get a printer, lol.

Bob88GTA

iTrader: (2)

By the looks of the 3D Printed ALDL cover, with those non-beveled mount tabs, once it's on it would be hard to remove. IDK..

Nitewulf98

Good point. Looking at the last pic (original?) shows the beveled edge. Can always tweak the plans. I would like to see more and maybe even make some plans for hard to find parts.

brettr81

The double din stuff is here:

https://www.thirdgen.org/forums/car-...dio-bezel.html

LS2Swapped92

would buy if available. DDN on top

brettr81

Go to the thread listed earlier. You can go to 3d hubs and have anything 3d model printed. Usually it's pretty cheap. Should be around $20.

Nitewulf98

I actually looked to see if this had been posted before, but did not find that post. Thanks for showing me where it is.

Nitewulf98

After doing a better search, came across this,


https://www.thirdgen.org/forums/inte...-printing.html

7thdarkangel

Boy do those look familiar.

Nitewulf98

You definitely did a great job! I am hoping to get into printing and definitely glad I came across your plans.

Vanilla Ice

We do need a repository for these. I'll be adding to it.

DynoDave43

iTrader: (11)

That's a fine idea.

brettr81

That's why for https://www.thirdgen.org/forums/car-...dio-bezel.html I updated the posted with all the links for the 3d files for the different (and amazing) bezels made by 7thdarkangel and Cehbra.

I do think a thread with all the links to 3d printing resources thirdgen related would be great, with the first post updated with links, description, and credit to the person that designed it. With a lot of the pieces becoming more and more rare (damn cupholder screw covers). A resource and more members willing to help those resources would be great, and making sure we credit the ones that decide to spend the time, designing, printing, editing, reprinting, looking for ways to further improve it. These resources aren't something that magically appear and work the first time.

scottmoyer

Has anybody 3D printed the 1982 only seat belt covers? I need a set and I think the aftermarket ones are incorrect.

Incorrect replacements:


Correct covers:

Nitewulf98

Changed the first post to reflect suggestions, which was kind of my intent from the beginning. I apologize that I did not give proper credit to the creators of the files originally.

brettr81

It's just good to make sure the people get credit, and maybe link the threads so people know how it fits, if and any other little things about what they did.

Vanilla Ice

Here's one to add:
https://www.thingiverse.com/thing:2550954/apps/#apps
Designed by me, it's not perfect, but 3d Prints aren't resto parts anyway.
Hasn't been printed yet. But I believe I've got a good Gcode file to try. Next time I load up ABS I'll print it off.

sunbound

I hate to resurrect an old thread... anyone have an STL for our plastic interior screws?

LS2Swapped92

I wish someone could make a reproduction of this plastic piece. It's for the 91.5-92 hatch assemblies. They often break off or are missing for the auto hatch switch

I can't even find one

scooter

iTrader: (11)

I can't find the guy printing out the plastic piece that holds the seat belt guide together.

7thdarkangel

Got a pic of what your talking about? I can model one up for you.

ontogenesis

Late addition to the game...

I created a plug for the ECM harness pass-thru in the passenger side footwell.
https://www.thingiverse.com/thing:4239497

scooter

iTrader: (11)

link didn't work for me

ontogenesis

Should now, I saved it instead of publishing it.

YoungDavid

Hey! I know this is an old thread, but know anyone that could design headlight bezels for an 02 Firebird?

codyman125

Hey David, while that is possible, you're probably in the wrong location. This site is dedicated to "Third Gen" (1982-1992) Firebirds and Camaros. The skills exist to do what you're asking here, but not many of us would have the car you're asking about to model from.