PIX OF THE NEW MOTOR

Reply Subscribe

Thread Tools

Search this Thread

Mar 7, 2008 | 07:39 AM

91_z28_guy

Thread Starter

Member

Joined: Jun 2007

Posts: 128

Likes: 0

From: Humble,Texas

Car: 91 CAMARO Z28

Engine: 5.8L TPI 355 L98

Transmission: 700R4

Axle/Gears: 3.23

PIX OF THE NEW MOTOR

https://www.thirdgen.org/forums/atta...1&d=1204898704

Attached Thumbnails

Last edited by 91_z28_guy; Mar 7, 2008 at 07:53 AM.

Mar 7, 2008 | 12:17 PM

2fast4u92z

Member

Joined: Mar 2006

Posts: 297

Likes: 0

From: FH/Waterford/Port Huron, MI

Car: 2 camaros 1 trailblazer SS

Engine: 346twinturbo, 383tpi

Transmission: t56 and 700r4

Axle/Gears: 3:46 4:11

Re: PIX OF THE NEW MOTOR

Nice but some specs would be nicer.

Side note if your car still has no stripes like in the pic you should get some. They are cheap on ebay! I bought the front strip just as a guide for the painted stripes!

Mar 10, 2008 | 10:39 AM

91_z28_guy

Thread Starter

Member

Joined: Jun 2007

Posts: 128

Likes: 0

From: Humble,Texas

Car: 91 CAMARO Z28

Engine: 5.8L TPI 355 L98

Transmission: 700R4

Axle/Gears: 3.23

Re: PIX OF THE NEW MOTOR

WELL SO FAR I KEPT THE ORIGINAL BLOCK AND BORED IT .30 OVER. NEW HYERUTECTIC PISTONS FROM SPEEDPRO. NEW P RODS, NEW CRANK (STOCK) ALSO LINE BORED. THEN I HAVE RESURFACED THE HEADS, WITH NEW SPRINGS FROM COMP, A COMP CAM WITH .420 LIFT, NEW 1.6 LUNATI ROLLER ROCKERS THAT I JUST GOT YESTURDAY. AND SOME HARDENED PUSH RODS. NOTHING TO MAJOR OVER STOCK BUT IT SHOULD BE A LITTLE BETTER THAN IT WAS BEFORE I BLEW IT. ALSO HEDMAN HEADERS AND 4 INCH EXAUST. REBUILT TRANNY.

Mar 10, 2008 | 11:06 AM

mw66nova

Supreme Member

iTrader: (13)

Joined: Jun 2002

Posts: 13,576

Likes: 30

From: Harford County, MD

Car: camaro sportcoupe

Engine: 7.0L

Transmission: G-Force GF5R

Axle/Gears: Moser 9"

Re: PIX OF THE NEW MOTOR

fyi, a 355 is not 6.0L's...you might wanna change your info under your username, cause that sounds somewhat misleading. if anything, 355cubes is roughtly 5.8L's...