Just Joined, Introducing Myself & My Ride...
Thread Starter
Member
iTrader: (1)
Joined: Oct 2007
Posts: 141
Likes: 0
From: Regina, Saskatchewan, Canada
Car: 1990 Trans Am GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.42's
Just Joined, Introducing Myself & My Ride...
Hey everyone, just recently joined this site so I thought I would introduce myself and my ride. I'm from Regina, Sask., Canada, 18 years old and about 2 months ago I bought a 1990 Trans Am GTA (350 TPI). I couldn't be happier these cars are awesome and it's nice to have something everyone else doesn't have "Cough Ford Mustangs Cough" lol..anyway, it has about 160,000km's or 99,000 miles but the engine was rebuilt 2 years ago for $5000 (have receipt) so that was awesome
...anyway nice being a member here now (been a member over at the GTA Sourcepage for awhile) so here are a couple pictures...enjoy, Josh
Sorry for the bad quality...these pictures look alot better on the site I use to host them...oh well


All Stock as you can see except since that picture I have a K&N Air Filter and things look a little cleaner...

...anyway nice being a member here now (been a member over at the GTA Sourcepage for awhile) so here are a couple pictures...enjoy, Josh
Sorry for the bad quality...these pictures look alot better on the site I use to host them...oh wellAll Stock as you can see except since that picture I have a K&N Air Filter and things look a little cleaner...
Thread Starter
Member
iTrader: (1)
Joined: Oct 2007
Posts: 141
Likes: 0
From: Regina, Saskatchewan, Canada
Car: 1990 Trans Am GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.42's
Re: Just Joined, Introducing Myself & My Ride...
Sorry posted this in the wrong section...don't hate me...lol Josh
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
Re: Just Joined, Introducing Myself & My Ride...
welcome! very clean bird you have there!
Thread Starter
Member
iTrader: (1)
Joined: Oct 2007
Posts: 141
Likes: 0
From: Regina, Saskatchewan, Canada
Car: 1990 Trans Am GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.42's
Joined: Oct 2006
Posts: 3,041
Likes: 8
From: West of Toronto
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn
Re: Just Joined, Introducing Myself & My Ride...
Nice car.............welcome to the board. Don't forget to check out the Ontatio and Canada sections.
Trending Topics
Supreme Member

Joined: Sep 2005
Posts: 2,151
Likes: 0
From: Osceola Indiana
Car: 92 RS(sold) 1989 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: ones that turn
Re: Just Joined, Introducing Myself & My Ride...
welcome to the boards, and btw sweet GTA it seems like nowaday there are tons of nice GTA's appearing in cananda
Supreme Member

Joined: Aug 2004
Posts: 1,214
Likes: 3
From: Norwich, CT
Car: '89 Trans AM/'88 GTA
Engine: (2) Tuned Port L98's
Re: Just Joined, Introducing Myself & My Ride...
Love the car, GTA's are in a class all their own
...Where's all the normal Trans AM's at though!
...Where's all the normal Trans AM's at though!
Supreme Member
Joined: Dec 1999
Posts: 1,934
Likes: 1
From: Calgary
Car: 89 Formula
Engine: 350
Transmission: TH 700R4
Axle/Gears: 3.27
Re: Just Joined, Introducing Myself & My Ride...
You could still get a 350 T-top in 1990??
Check your VIN for the 8 that =350 an F=305
Nice car though
Check your VIN for the 8 that =350 an F=305Nice car though
Senior Member
Joined: Jul 2007
Posts: 1,461
Likes: 1
From: Manchester, CT + Nashua, NH
Car: 90 Firebird Formula
Engine: LO3
Transmission: T5
Axle/Gears: 3.08 one wheel peel
Re: Just Joined, Introducing Myself & My Ride...
those look like the aftermarket t-tops. I would recommend a set of good SFC's as a first mod.
Thread Starter
Member
iTrader: (1)
Joined: Oct 2007
Posts: 141
Likes: 0
From: Regina, Saskatchewan, Canada
Car: 1990 Trans Am GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.42's
Re: Just Joined, Introducing Myself & My Ride...

----------
don't laught but i'm not sure what SFC stands for..just got into cars over a year ago so I don't know much other than the basics...lots of learning ahead...
Last edited by 90BlackGTA; Oct 23, 2007 at 03:06 AM. Reason: Automerged Doublepost
Member
iTrader: (1)
Joined: Jun 2007
Posts: 318
Likes: 0
From: Halifax, N.S.
Car: 89 T/A
Engine: LB9
Transmission: W/C T-5
Axle/Gears: 10 bolt posi, 3.73 Richmond Gears
Re: Just Joined, Introducing Myself & My Ride...
Welcome to the boards from a 89 T/A owner in Halifax, NS
Nice ride...
Nice ride...
Senior Member
iTrader: (1)
Joined: Nov 2006
Posts: 452
Likes: 1
From: Tennessee
Car: 1989 Pontiac GTA
Engine: 350 5.7 T.P.I.
Transmission: TH 700-R4
Axle/Gears: 3.27
Re: Just Joined, Introducing Myself & My Ride...
don't laught but i'm not sure what SFC stands for..just got into cars over a year ago so I don't know much other than the basics...lots of learning ahead...[/quote]
SFC'S=sub frame connectors- they connect the sub frame together, so they reduce body twist. In your case you dont want this because it will make your tops leak. Nice car.
SFC'S=sub frame connectors- they connect the sub frame together, so they reduce body twist. In your case you dont want this because it will make your tops leak. Nice car.
Thread Starter
Member
iTrader: (1)
Joined: Oct 2007
Posts: 141
Likes: 0
From: Regina, Saskatchewan, Canada
Car: 1990 Trans Am GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.42's
Re: Just Joined, Introducing Myself & My Ride...
Maybe thats why my T-Tops leak sometimes..have to look into that
Joined: Aug 2006
Posts: 12,812
Likes: 110
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: Just Joined, Introducing Myself & My Ride...
yup, definitely aftermarket t-tops, maybe the cc ones
the t-tops leak because they were designed to.

very nice, clean ride BTW
Senior Member
iTrader: (1)
Joined: Apr 2007
Posts: 668
Likes: 4
From: Palm Coast, FL
Car: 86 T/A & 88 GTA
Engine: 305 LB9 TPI & 350 LO5 TPI
Transmission: Jasper 4L60 x2
Axle/Gears: 2.77/posi LSD & 2.73/posi LSD
Member
iTrader: (1)
Joined: Apr 2006
Posts: 356
Likes: 0
From: Washington
Car: 1985 Sport Coupe
Engine: 3800 Series II Turbo
Transmission: 4th-gen WC T5
Axle/Gears: 3.27 BW Limited
Re: Just Joined, Introducing Myself & My Ride...
Thread Starter
Member
iTrader: (1)
Joined: Oct 2007
Posts: 141
Likes: 0
From: Regina, Saskatchewan, Canada
Car: 1990 Trans Am GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.42's
Re: Just Joined, Introducing Myself & My Ride...
Yeah they are the Cars and Concepts T-Tops...glad they were in the car already when I bought it...wanted a T-Top car, but they do leak sometimes but not in the middle just at the top of the side windows, and I hear sub frame connectors are only necessary for cars pushing out lots of horse power...my car is all stock exept K&N Filter so are they necessary? Thanks, Josh
Supreme Member
iTrader: (5)
Joined: Oct 2005
Posts: 1,775
Likes: 1
From: MA
Car: 1995 Formula; 1976 Trans Am
Engine: LT1; None
Transmission: T56; None
Re: Just Joined, Introducing Myself & My Ride...
Even stock thirdgens will benefit greatly from the connectors, since these cars, especially with t-tops, have a lot of chassis flex.
Senior Member
iTrader: (1)
Joined: Apr 2007
Posts: 668
Likes: 4
From: Palm Coast, FL
Car: 86 T/A & 88 GTA
Engine: 305 LB9 TPI & 350 LO5 TPI
Transmission: Jasper 4L60 x2
Axle/Gears: 2.77/posi LSD & 2.73/posi LSD
Re: Just Joined, Introducing Myself & My Ride...
sfc's will contribute to a much nicer ride better handling and etc.etc.etc...
that is going to be my next mod.
that is going to be my next mod.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
Mongoose462ci
North East Region
0
Sep 16, 2015 11:46 PM




