hey are any of you other fellow tbiers going to the meet this sunday??? if so and you have mods to your tbi i would like to hook up and check them out. right now i have the extreme kn lid and the white 3x14 open element filter and also i have the fuel pod raised.
also wondering about the spiraled tb spacer??? i know they claim lots of power and improved gas milage but has any one of ya'll used them??? if so what do you think?
thanks for any info you can provide!!
chris

 

I'll be up that direction on Oct 13th and be there for about 6 weeks if you want to hook up.

 

im stationed in va beach. i used to run the tbi spacer in my car i did feel a difference in torque and it did improve my gas mileage as long as i kept my lead foot off the gas pedal. i had to take it off after i put the edelbrock manifold on. clearance problems and didnt feel like cutting a hole in my hood scoop. ill put it back on once i get the money to buy a aftermarket hood.

 

hey
i am in va beach
i was running the show on the 29th, but didnt get a chance to check out all the 3rd gens(or hardly any of the cars) since i was busy with the show stuff and dj'ing at the same time
i wanted to see what some guys have done to the TBI's since i am working on one myself right now

Joe

 

hey does anybody know of a dyno here in virginia beach and where is the track at. i just got off cruise not to long ago and i just got my car up here and i want to find out how much hp i have and the times to. got an 88 firebird 305 tbi:
about to do the ultimate tbi mod
flowmaster muffler
3'' exhaust system
headers
edelbrock intake manifold
k&n air filter
cam
aluminum roller rockers
chip
170 thermostat
heads have been port polished, shaved 3 angle valve job
trans go shift kit
3.42 gear ratio
emissions are off
msd 6a
msd ss coil
accell 8.8 mm wires

thats it for right know.

how and bald tires foot is still over weight.

 

Guys, check out the link in my sig for ThirdGen Nat'ls '03. If interested email me buffshields@yahoo.com with your name/thirdgen name/and aim if you use it. thanks.

I'll probably PM some of you in the next few days, in case you don't check back here.

 

Abacus racing does dyno pulls. $55.00 for 2 pulls. If your interested I'll dig out their buisness card for ya. 92RSV8 you already know me... glad to see ya over here...

 

I was at the show on the 29th! Yall should check out www.hr3rdgen.org/forum

We have about 75 or so people from this area on the board right now, and we try to meet up pretty regularly.

 

Hey, I have the injector spacer and the eddlebrock intake. I also have the TBI spacer but i couldnt get the linkages to match up to the tbi. is there a bracket to rais up the throttle and the kick down bracket? I was irritated about it and didnt fool with it to long. i noticed good torque and power with the intake and spacer.