bigals87z28

Dec 20th in toms river on rt 37 west at fudruckers. Probably gunna meet there around 6ish. Its not yet 100% offical, but I will be there for some grub!!

TomP

So this is just for NJFBA members then?

bigals87z28

No, anyone can come, its just gunna probably be mostly NJFBA memebrs there.

86IROCNJ

About how many people there? Do you know the cross street? I forget where Fudruckers is.

Notch-boy14

If i don't have to work i'll show. just post some vague directions on how to get there. hasta. see ya there

bigals87z28

Its very easy. If you have ever been to seaside, its easy.


Coming from the north(heading south), get off parkway exit 82. Its a little after the toll. Get of exit 82 you should see on the sign "37 east/Seaside Hights"
continue on 37 east past 3 lights. After the 3rd light or so, you will start to see the Fudruckers on the other side of the highway. There is a jughandle coming up on your right. Take it, and get onto 37 west. Pull in an you should see some fbodies. If you live in monmouth county and would like to cruse down with us, be at the monmouth mall between 545 and 6 near the Chillis. Ill be there till 6 and then we will leave for Toms River. If anyone has any questions, feel free to PM me or IM me. At this present time, my IM is down so PM me. Hope to see you guys there.

Alex

Notch-boy14

sweet al thanks. i'll try and get there.

bigals87z28

Its almost right across from where we all met over the summer if you remember. You will pass the super stop and shop right before the jug.

1991tealRSt-topGuy

i hope the weather is better

1991tealRSt-topGuy

Alex-

if i have to work that saturday i will most likely be there!

cuz i get out at 5 and work is a block away

(providing the weather is good too)

bigals87z28

good, cause your 2 years behind eveyrone else gad dam it!

1991tealRSt-topGuy

hey

i had 2 years worth of engine swap i had to compensate for

nikh23

uh yea i never fixed my brakes this summer like i should have soooooooo i don't have a car to come down in, i'll have to wait until spring or until i actually get some motivation to finish the lines heh

bigals87z28

Ill let it slide... hehehe. Hope to see you there.

1991tealRSt-topGuy

my next engine swap is going to be even bigger

like 454 bigger

bigals87z28

nice!

1991tealRSt-topGuy

true

its a while off, but nice it will be

TomP

Maybe I'll take a swing by; the Toms River meet was cool, it'd be good to see you guys again. Lets see if my work schedule co-operates! And remember that crash and framework and paintjob I was talking about? Well I actually dug up those pictures from '96, bought a photo album, and put 'em in order. Only took me 7 years

TomP

Update, just got me one of those fancy new-fangled photo printers! I think this weekend I'll burn thru all my photo paper and print out my pictures of the suspension rebuild I did this summer.

robertg

iTrader: (2)

tom..

if you could post a website detailing your suspension rebuild, that would be cool.

TomP

Rob, actually, that's been on my list of things to do since the rebuild! Shoot I really gotta do that soon before I forget what the hell I did. Did you see my daily writeups on it? If not, here's a few links to hold you over until then!

Final parts list: https://www.thirdgen.org/techbb2/sho...hreadid=184552

Day 1: https://www.thirdgen.org/techbb2/sho...hreadid=185664

Day 2: https://www.thirdgen.org/techbb2/sho...hreadid=186057

Day 3: https://www.thirdgen.org/techbb2/sho...hreadid=186444

Day 4/5/6: https://www.thirdgen.org/techbb2/sho...hreadid=187054

Finished! https://www.thirdgen.org/techbb2/sho...hreadid=187293

GM part #s for control arm bolts: https://www.thirdgen.org/techbb2/sho...hreadid=184591

Problems separating center link from pitman arm: https://www.thirdgen.org/techbb2/sho...hreadid=186554

Removing control arm bushings: https://www.thirdgen.org/techbb2/sho...hreadid=186120

Upper strut mount incompatibility & fix (BIG thanks to JamesC!) https://www.thirdgen.org/techbb2/sho...hreadid=183622

Yep... so one day I'll cram that all into a webpage... anybody got a spare day lying around they don't need?

1991tealRSt-topGuy

eh, dont think i am making it

helping one of our service advisors move into a new home ($$$ for me)