Piston and Ring Set and Eagle Crank
Thread Starter
TGO Supporter
Joined: Sep 2004
Posts: 5
Likes: 0
From: Highlands Ranch, CO
Car: 1992 Camaro RS
Engine: 350 +.060 TPI
Transmission: 700R4
Piston and Ring Set and Eagle Crank
I have a full set +.030" Kieth Black hypereutectic pistons and plasma moly cast iron ring set and an Eagle std/std cast steel crank for 2 piece rear main seal blocks.
$200 for all or make me an offer for pistons or crank.
$200 for all or make me an offer for pistons or crank.
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
is the crank a 3.48" stroke (stock 350)? has it ever been used? if so, will it need undergrinding?
Thread Starter
TGO Supporter
Joined: Sep 2004
Posts: 5
Likes: 0
From: Highlands Ranch, CO
Car: 1992 Camaro RS
Engine: 350 +.060 TPI
Transmission: 700R4
The crank is a 3.48" stroke. It is brand new, straight out of a Jegs rolling assembly kit (I had a 1 piece seal and not 2 piece).
Junior Member
Joined: May 2005
Posts: 6
Likes: 0
From: portland or
Car: honda for fuel, 88 gta for fun
Engine: 2.0, 5.7
Transmission: 5 sp, 700r4
crank
i have an eagle crank 3.48 stroke cast from eagle the engine was assembled and there appears to be an oil gally cracked so im selling the crank -new assembled only - i would be interested in trading
email @ travis.wenks AT gmail DOT com
email @ travis.wenks AT gmail DOT com
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
would either of you guys consider $100 shipped? i need to get my car back on the road and this is one piece i definitely need.
Trending Topics
Thread Starter
TGO Supporter
Joined: Sep 2004
Posts: 5
Likes: 0
From: Highlands Ranch, CO
Car: 1992 Camaro RS
Engine: 350 +.060 TPI
Transmission: 700R4
More Info:
The pistons are Black 7cc Flat Top - Comp Ratio: 10.9:1 w/58cc, 10.2:1 w/64cc, 8.9:1 w/76cc with 5.700" connecting rod and
standard crank. The "United Engine and Machine
Company" part number is KB106 and the web site is
http://kb-silvolite.com/performance....tails&P_id=156
The crank is a standard cast steel Eagle crank for blocks with 2 piece rear main seal. I can't find a part number from the manufacturer, but here are all the specs I could find:
".092 radius on rod, main journals, rear seal & snout for increased strength & still use inexpensive OE bearings! "
"Journal finish of 6 R.A. or less."
Stroke:3.480 Bob weight:1870 Rod journal:2.100 Main journal:2.450 Balance:Internal
The pistons are Black 7cc Flat Top - Comp Ratio: 10.9:1 w/58cc, 10.2:1 w/64cc, 8.9:1 w/76cc with 5.700" connecting rod and
standard crank. The "United Engine and Machine
Company" part number is KB106 and the web site is
http://kb-silvolite.com/performance....tails&P_id=156
The crank is a standard cast steel Eagle crank for blocks with 2 piece rear main seal. I can't find a part number from the manufacturer, but here are all the specs I could find:
".092 radius on rod, main journals, rear seal & snout for increased strength & still use inexpensive OE bearings! "
"Journal finish of 6 R.A. or less."
Stroke:3.480 Bob weight:1870 Rod journal:2.100 Main journal:2.450 Balance:Internal
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
Sep 2, 2015 02:45 PM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
Aug 20, 2015 09:36 PM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM