S/R torquer heads, zz4 cam and more
#1
Member
Thread Starter
Join Date: Jun 2002
Location: Toronto, Canada
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
S/R torquer heads, zz4 cam and more
Hi all,
My new engine is on the way so I have some things that I will be parting with.
72cc S/R Torquer heads - were originally 76cc but flat milled to 72cc. Only used for 3k on the new rebuild. Check out www.worldcastings.com for more information on these heads - $450
7.3" pushrods - 16 of them, new last year(3k on them) - $40
ZZ4 cam - 3k on this too. Very similar to Hotcam - $100
Perimeter bolt polished valve covers - $40
Weiand Super Xlerator single plane intake - like new - $75
350 2 bolt main out of my Camaro - needs new rings, etc - $200 - Sold
L98 Heads - good condition, did not blow any smoke when removed $150Sold
TPI intake - no port work done - $50 - Sold
L98 Cam - in good condition - $40 Sold
Corvette TPI Intake Manifold w/cold start provision $40
16 roller lifters from low mile LT1 - $75
Shipping is extra
Let me know what you need
Scott
My new engine is on the way so I have some things that I will be parting with.
72cc S/R Torquer heads - were originally 76cc but flat milled to 72cc. Only used for 3k on the new rebuild. Check out www.worldcastings.com for more information on these heads - $450
7.3" pushrods - 16 of them, new last year(3k on them) - $40
ZZ4 cam - 3k on this too. Very similar to Hotcam - $100
Perimeter bolt polished valve covers - $40
Weiand Super Xlerator single plane intake - like new - $75
350 2 bolt main out of my Camaro - needs new rings, etc - $200 - Sold
L98 Heads - good condition, did not blow any smoke when removed $150Sold
TPI intake - no port work done - $50 - Sold
L98 Cam - in good condition - $40 Sold
Corvette TPI Intake Manifold w/cold start provision $40
16 roller lifters from low mile LT1 - $75
Shipping is extra
Let me know what you need
Scott
Last edited by '89 superbird; 01-29-2006 at 09:16 AM.
#3
Supreme Member
iTrader: (3)
Join Date: Feb 2001
Location: Winfield, IL
Posts: 1,375
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 RS
Engine: 350tpi comming soon!
Transmission: fixed the 700r4 again!
how many miles on the lifters?? might be intrested on the heads possibly... got any pics?? also pre87 or post 87..
#4
Member
Thread Starter
Join Date: Jun 2002
Location: Toronto, Canada
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Lifters had 65,000 miles on them. The heads were on my '87 Camaro for the 3k after they were rebuilt.
I got brand new dart heads with my stroker so now can sell these.
Hope this helps
Scott
I got brand new dart heads with my stroker so now can sell these.
Hope this helps
Scott
#5
Member
Join Date: Sep 2005
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 iroc
Engine: yea it has one
Transmission: yea it has one of them also (im 2 for 2) :)
Corvette TPI Intake Manifold w/cold start provision $40
can i have pics of this sent to
three21bigboykiller@yahoo.com
can i have pics of this sent to
three21bigboykiller@yahoo.com
#7
Junior Member
Join Date: Oct 2002
Location: Liberty,NY
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Car: 81 Camaro
Engine: 406w/TPI & Serpentine belt setup
Transmission: 700R4 & 3.42 Posi
the S/R torquer heads, are these for 87+ motors with the different bolt angles? If so, I am interested.
Trending Topics
#8
Member
Thread Starter
Join Date: Jun 2002
Location: Toronto, Canada
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
I had them on my '87 Camaro with its original block. I did use a corvette tpi intake which has a slightly different bolt angle pattern for the middle bolts. This intake is for sale as well.
Hope this helps
Hope this helps
#10
Supreme Member
Join Date: Aug 2005
Location: Yellowknife, NWT, Canada
Posts: 3,004
Likes: 0
Received 2 Likes
on
2 Posts
Car: 84 Z28
Engine: 357
Transmission: TH-350C
Axle/Gears: 3.43
Prices in ca$ right?
I may also be interested in the heads if you could get the part number and shipping cost to X1A-3X6.
I may also be interested in the heads if you could get the part number and shipping cost to X1A-3X6.
#11
Member
Thread Starter
Join Date: Jun 2002
Location: Toronto, Canada
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Price is in US$, $500 Cdn
I do have the part number but I am on a cruise ship in the middle of the Gulf of Mexico so can't get it until next Tuesday. I will post it here when I do
I do have the part number but I am on a cruise ship in the middle of the Gulf of Mexico so can't get it until next Tuesday. I will post it here when I do
Thread
Thread Starter
Forum
Replies
Last Post
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
09-02-2015 02:45 PM