WTB: Vortec head
Junior Member
Joined: May 2003
Posts: 90
Likes: 0
From: Overland Park in the Great State of KANSAS
Car: 91 Z28
Engine: 468 ci
Transmission: thm 350
Here's a head that I sell a lot of that my head porter also likes.
They are made by Renegade, not too well known yet but the specs and price speak for themselves!
190cc intake
64cc combustion chambers
2.02/1.60 valves
Straight or angle plug (I suggest angle for plug access with headers)
Early style (pre 87), non-EGR
Bronze Guides cut for .530 seals
Hardened steel seats
Accepts standard or center bolt valve covers
comes assembled with stainless steel valves
Dual springs for up to .700 lift
7 degree retainers
Machined locks
guide plates
3/8 screw-in rocker arm studs
here's the flow
.200 112.5 97
.300 163.3 135.5
.400 209.2 167.9
.500 243.5 176.4
.600 265.2 175.8
Now for the price $875.00
only a little over $300 more than Vortecs!
OH did I mention that these are aluminum!
They are made by Renegade, not too well known yet but the specs and price speak for themselves!
190cc intake
64cc combustion chambers
2.02/1.60 valves
Straight or angle plug (I suggest angle for plug access with headers)
Early style (pre 87), non-EGR
Bronze Guides cut for .530 seals
Hardened steel seats
Accepts standard or center bolt valve covers
comes assembled with stainless steel valves
Dual springs for up to .700 lift
7 degree retainers
Machined locks
guide plates
3/8 screw-in rocker arm studs
here's the flow
.200 112.5 97
.300 163.3 135.5
.400 209.2 167.9
.500 243.5 176.4
.600 265.2 175.8
Now for the price $875.00
only a little over $300 more than Vortecs!
OH did I mention that these are aluminum!
Member
Joined: Feb 2005
Posts: 402
Likes: 0
From: Lillington,N.C.
Car: 84Z28
Engine: 0.030 over 10.25:1 dart heads 350
Transmission: T 5 W.C. now
Axle/Gears: 3.73:1
Originally posted by katman
Here's a head that I sell a lot of that my head porter also likes.
They are made by Renegade, not too well known yet but the specs and price speak for themselves!
190cc intake
64cc combustion chambers
2.02/1.60 valves
Straight or angle plug (I suggest angle for plug access with headers)
Early style (pre 87), non-EGR
Bronze Guides cut for .530 seals
Hardened steel seats
Accepts standard or center bolt valve covers
comes assembled with stainless steel valves
Dual springs for up to .700 lift
7 degree retainers
Machined locks
guide plates
3/8 screw-in rocker arm studs
here's the flow
.200 112.5 97
.300 163.3 135.5
.400 209.2 167.9
.500 243.5 176.4
.600 265.2 175.8
Now for the price $875.00
only a little over $300 more than Vortecs!
OH did I mention that these are aluminum!
Here's a head that I sell a lot of that my head porter also likes.
They are made by Renegade, not too well known yet but the specs and price speak for themselves!
190cc intake
64cc combustion chambers
2.02/1.60 valves
Straight or angle plug (I suggest angle for plug access with headers)
Early style (pre 87), non-EGR
Bronze Guides cut for .530 seals
Hardened steel seats
Accepts standard or center bolt valve covers
comes assembled with stainless steel valves
Dual springs for up to .700 lift
7 degree retainers
Machined locks
guide plates
3/8 screw-in rocker arm studs
here's the flow
.200 112.5 97
.300 163.3 135.5
.400 209.2 167.9
.500 243.5 176.4
.600 265.2 175.8
Now for the price $875.00
only a little over $300 more than Vortecs!
OH did I mention that these are aluminum!
Junior Member
Joined: May 2003
Posts: 90
Likes: 0
From: Overland Park in the Great State of KANSAS
Car: 91 Z28
Engine: 468 ci
Transmission: thm 350
What do you need to know? I've got a Group purchase going on the heads.
https://www.thirdgen.org/techbb2/sho...29#post2410129 Scroll down towards the bottom.
https://www.thirdgen.org/techbb2/sho...29#post2410129 Scroll down towards the bottom.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
Aug 20, 2017 12:16 AM
L98GTA87
Engine/Drivetrain/Suspension Wanted
1
Aug 11, 2015 06:55 PM
84z96L31vortec
North East Region
1
Aug 10, 2015 08:27 PM