how much boost can a motor with 9.3:1 compression handle?...
Thread Starter
Supreme Member
Joined: Nov 1999
Posts: 1,253
Likes: 1
From: Hawaii
Car: 1984 Chevy Camaro
Engine: Built L98
Transmission: T-56 6 speed
how much boost can a motor with 9.3:1 compression handle?...
I'm not gonna push the motor to its limit of life. But I"m just wondering like about how much a motor with 9.3:1 compression can handle
Thanks in advanced.
(side note: I will probalby lower my compression a bit more but not aht much)
Thanks in advanced.
(side note: I will probalby lower my compression a bit more but not aht much)
Supreme Member
Joined: Jul 1999
Posts: 1,827
Likes: 1
From: Indianapolis, IN
Car: 2000 Trans Am
Engine: LS1
Transmission: T56
You will be fine with 9.3:1 compression. Im running 9.2:1 right now and plan on running about 25-30psi of boost when it is all said and done.
As long as you can control your fuel and timing and run good fuel when under boost, you will be fine.
Hell, you can even run pump gas with probably 10-15psi with 9.3 and just back the timing down in the PROM.
Good luck. Be careful!
As long as you can control your fuel and timing and run good fuel when under boost, you will be fine.
Hell, you can even run pump gas with probably 10-15psi with 9.3 and just back the timing down in the PROM.
Good luck. Be careful!
i ran 12psi on pump gas with my procharger for almost a year and a half.....with the supplied inline pump, good gas, and tuned the FMU the car ran really good
i just wish i thought about replacing my aging 70k mile intank pump.
It died, i went lean, and the motor went BOOM
oh, i had a 3 core intercooler at the time too and no prom work
i just wish i thought about replacing my aging 70k mile intank pump.
It died, i went lean, and the motor went BOOM
oh, i had a 3 core intercooler at the time too and no prom work
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM





