Power Adders Getting a Supercharger or Turbocharger? Thinking about using Nitrous? All forced induction and N2O topics discussed here.

Getting N20:Can i use the carter mechanical pump or should i get a electric pump?

Thread Tools
 
Search this Thread
 
Old Jan 29, 2001 | 08:29 AM
  #1  
firebird305's Avatar
Thread Starter
Member
 
Joined: Feb 2000
Posts: 214
Likes: 0
From: Ocala,Florida
Getting N20:Can i use the carter mechanical pump or should i get a electric pump?

In about a month,I will be getting a NOS power shot system (125 horse shot)for my firebird. I wanted to upgrade my fuel pump just to be safe,But i'm undecided on what pump to get. The carter mechanical pump i'm looking at flows 120 g.p.h. at 6 p.s.i.,And the tech guy at summit said that this should be more then adequate. Is he right,or should i get and electric pump?

------------------
82 firebird with 305H.O.,Block bored .30 over,Keith black hyperutectic flat top pistons for 10 to 1 compression,Turned crank,Magnafluxed connecting rods,Melling H.V. oil pump,and double roller timeing chain,Ported and shaved heads w/3angle valve job,Z-28springs,Summit push rods and comp cams magnum roller rockers,Ported Edelbrock performer r.p.m.intake,Carter 625 afbcarb,Accell spark plugs,wires,and H.E.I.super coil,Heavy duty cap and rotor,Clevite performance cam with 450-460 inches of lift,Comp cams lifters,700r-4 tranny rebuilt with trans-go rebuild kit,corvette servo,New torQue converter,Flowtech headers,Flowmaster muffler,3.73limited slip rear end,Energy suspension bushings from front to rear,Energy suspension tranny mount,New center link,ball joints,trans-am steering box,ASP power pully.
Reply
Old Jan 29, 2001 | 09:53 PM
  #2  
Superman's Avatar
Supreme Member
20 Year Member
 
Joined: Jan 2000
Posts: 1,301
Likes: 1
From: Panama City Beach,Florida
Car: 1989 Camaro
Engine: 406
Transmission: Pro-built 700R4
A mechanical fuel pump is suffecient up to 150HP shot of spray,after that I would say go with a dedicated electric fuel pump for the NOS only.
Reply
Old Jan 30, 2001 | 07:54 AM
  #3  
firebird305's Avatar
Thread Starter
Member
 
Joined: Feb 2000
Posts: 214
Likes: 0
From: Ocala,Florida
Thanks for the help,Superman,I think that's the pump i'll go with.

------------------
82 firebird with 305H.O.,Block bored .30 over,Keith black hyperutectic flat top pistons for 10 to 1 compression,Turned crank,Magnafluxed connecting rods,Melling H.V. oil pump,and double roller timeing chain,Ported and shaved heads w/3angle valve job,Z-28springs,Summit push rods and comp cams magnum roller rockers,Ported Edelbrock performer r.p.m.intake,Carter 625 afbcarb,Accell spark plugs,wires,and H.E.I.super coil,Heavy duty cap and rotor,Clevite performance cam with 450-460 inches of lift,Comp cams lifters,700r-4 tranny rebuilt with trans-go rebuild kit,corvette servo,New torQue converter,Flowtech headers,Flowmaster muffler,3.73limited slip rear end,Energy suspension bushings from front to rear,Energy suspension tranny mount,New center link,ball joints,trans-am steering box,ASP power pully.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RazorN8
Tech / General Engine
4
Jan 7, 2022 11:44 AM
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
Glowsock
Tech / General Engine
3
Jan 9, 2017 04:06 PM
krisner89
Carburetors
9
Sep 20, 2015 08:56 PM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM




All times are GMT -5. The time now is 04:44 AM.