i soooooooo wanted in on the recent last batch of turbo headers being made but i had to put a deposit and 1st months rent down on a house as i moved to FL. now i have the funds but i dont know where to get a QUALITY part from. any help?

i see these turbo headers on ebay all the time going for pretty cheap but i know they use cheap materials. anybody using them with success?

 

a few guys on theturboforums.com are having good luck but using the twin turbo headers, cutting the t4 flanges off and welding v-bands on and making their own crossover/merge pipe. The quality of the SSAC stuff is getting better and for $200 for 304 stainless headers is hard to beat, even making you're own

 

not to mention we live in NC and if the stuff breaks we can drive there and hand out some AXX whoppings

 

well the headers are 400 bucks. i think im gonna give them a go....

 

you can get them off ebay for $200 so if you are just patient you can get some for about half the price.

 

i really wanna run single turbo , and i dont see any single turbo headers on ebay.

 

search ebay for "chevy turbo upgrade". Seven of them popped up last time I did. I wouldn't buy these expecting to bolt them on as is. The crossover looks like it will need a little work to get past the starter and K-member, unless you have a tubular K-member. not much room for a big downpipe if you're keeping your AC, but they definitely seem like a good place to start.

 

hmm maybe you should re-read my first post....

 

well i dont want to make anything as far as the manifolds go. so fabricating my own pipe is out of the question. however modifying the existing cross over on one of those single turbo kits is an idea. a/c is already gone....

 

well id you dont want to fabricate anything, then stick with a supercharger kit that comes pre-made, there is NO turbo kit currently made for a third gen camaro.

 

somebody should change that too.

 

believe me, i'll be working on that when i get back

 

I'm selling my complete bolt-on twin turbo kit in the classifieds, everything you need.

 

Ive got 2 kits started to be Jigged up. But time is few and far between to work on em. One is similar to the BBS kit. and one is similar to prestons setup.

If anything they are gonna be on an order as needed basis. I dont plan to keep anything around.

but really if you dont want to do "ANY" fab work your better off buying a ATI Procharger.

or Pay for someones time to do a complete turbo kit for you. Neiter of which will be cheap.

 

i dont mind doing fab work. i just dont have a welder. im gonna look into a few things right quick. brb.

 

i would really rather a single turbo setup. Call me crazy but i like the feel of the power band better than twins.