Okay, in a blowthru turbo carb application, would you use an under carburetor adapter for the injection or would you just run the lines after the b.o.v. but before the carb??

 

I use a single nozzle from snow performance right after the supercharger

Matt

 

If you have a BOV run your nozzle after the BOV to limit the likelyhood of invisible methanol flame underhood explosions. Its not a common thing but it does happen. I've found that 6"-a foot before the throttle body works good with most applications.

 

x2

I have mine mounted right before the TB.

 

alright thanks, and wow that engine bay look clean as hell. lol.

 

I run a 5 GPH mcmaster-carr.com misting nozzle about 4-6" in front of the stock TPI throttle body. It turns on partially at 4 PSI and full on at 14 PSI of boost. It works well with a 50/50 water/alky mix.