My motors in,almost ready to run :)
Thread Starter
Senior Member
Joined: Jun 2000
Posts: 645
Likes: 0
From: NY
Car: 2013 C63C
Engine: M156 (P31)
Transmission: 7 speed MCT
Axle/Gears: AMG Limited Slip
My motors in,almost ready to run :)
I know most of you guys are more into turbocharging V8's but I'm just really excited about getting it together.Should have it running in a week or so,just gotta wait for a few more parts - an Innovative Pro Gate and some fuel fittings - and it should be running.Good thing too cause I'm going stir crazy here and E-Town opened today 



Steve




Steve
Last edited by TTA850; Mar 8, 2002 at 04:19 AM.
cool....u have any from the frront?
i'm trying to gauge the clearance and how close it is to the ground for fitment on my friends TTA
thanks again
i'm trying to gauge the clearance and how close it is to the ground for fitment on my friends TTA
thanks again
Last edited by 89ProchargedROC; Mar 3, 2002 at 10:12 PM.
Trending Topics
Thread Starter
Senior Member
Joined: Jun 2000
Posts: 645
Likes: 0
From: NY
Car: 2013 C63C
Engine: M156 (P31)
Transmission: 7 speed MCT
Axle/Gears: AMG Limited Slip
Thanks guys 
As far as a hp figure - I set more of an ET goal of 9.99 to reach and I figure this combo should get me there(with tuning)
But I'm guessing something like 600-625hp(but no more than 650 cause my injectors will be maxxed)with at least as much if not more torque.Eventually I'm gonna upgrade to a ball bearing 70 turbo and 72 or 83# injectors and with that I'd hope to be closer to 700hp,at which point the heads and block become real limiting factors but thats probrobly a project for next summer.
Steve

As far as a hp figure - I set more of an ET goal of 9.99 to reach and I figure this combo should get me there(with tuning)
But I'm guessing something like 600-625hp(but no more than 650 cause my injectors will be maxxed)with at least as much if not more torque.Eventually I'm gonna upgrade to a ball bearing 70 turbo and 72 or 83# injectors and with that I'd hope to be closer to 700hp,at which point the heads and block become real limiting factors but thats probrobly a project for next summer.
Steve
Senior Member

Joined: Sep 1999
Posts: 764
Likes: 0
From: Emmaus, Pa
Car: 1987 Camaro IROC Z28
Engine: 355
Transmission: 1994 T56
Axle/Gears: BW 3.27 (stock)
looking good steve...can't wait to see that thing in action 
i can't believe it still says wash me on the window there....i think i wrote that there over a year ago...LOL

i can't believe it still says wash me on the window there....i think i wrote that there over a year ago...LOL
Thread Starter
Senior Member
Joined: Jun 2000
Posts: 645
Likes: 0
From: NY
Car: 2013 C63C
Engine: M156 (P31)
Transmission: 7 speed MCT
Axle/Gears: AMG Limited Slip
Tony,1st week of April it better be running if I'm gonna get it tuned in time to run that CBR in May.Never know maybe you'll see it in Philly 
britered86transam,thanks
I can take a few shots and popst em here(or take a bunch from all angles and send em to ya)if ya want.Let me know,I'll take some pics tomorrow.
Steve

britered86transam,thanks
I can take a few shots and popst em here(or take a bunch from all angles and send em to ya)if ya want.Let me know,I'll take some pics tomorrow.Steve
yeah if you could take a bunch of that hood and send them to me that would be great! my email is njdevilz27@aol.com thanks so much
Supreme Member
iTrader: (1)
Joined: Dec 1999
Posts: 4,335
Likes: 4
From: Mays Landing NJ
Car: 2018 Camaro SS
Engine: LT1 w/Paxton 1500SL
Originally posted by TTA850
Tony,1st week of April it better be running if I'm gonna get it tuned in time to run that CBR in May.Never know maybe you'll see it in Philly
britered86transam,thanks
I can take a few shots and popst em here(or take a bunch from all angles and send em to ya)if ya want.Let me know,I'll take some pics tomorrow.
Steve
Tony,1st week of April it better be running if I'm gonna get it tuned in time to run that CBR in May.Never know maybe you'll see it in Philly

britered86transam,thanks
I can take a few shots and popst em here(or take a bunch from all angles and send em to ya)if ya want.Let me know,I'll take some pics tomorrow.Steve
that'd be bad *** if u bring to philly for my swap. Two TGTA's side by side, but um don't be surpised if i get u so drunk u pass out, then i can take your TTA motor and swap it with mine
Thread Starter
Senior Member
Joined: Jun 2000
Posts: 645
Likes: 0
From: NY
Car: 2013 C63C
Engine: M156 (P31)
Transmission: 7 speed MCT
Axle/Gears: AMG Limited Slip
Two TGTA's side by side, but um don't be surpised if i get u so drunk u pass out, then i can take your TTA motor and swap it with mine
now I know your planbritered86transam,sending pics now - took em earlier today but had to go pick someone out of a police line up(long story)
Steve
TTA850
I don't suppose i could get some of those pics, too could I?
Jon
jmnierengart@students.wisc.edu
I don't suppose i could get some of those pics, too could I?
Jon
jmnierengart@students.wisc.edu
Thread Starter
Senior Member
Joined: Jun 2000
Posts: 645
Likes: 0
From: NY
Car: 2013 C63C
Engine: M156 (P31)
Transmission: 7 speed MCT
Axle/Gears: AMG Limited Slip
Cool deal Jon,I feel the same way about it 
I've also updated the pics on the top of the page scince adding new intercooler hoses(red
),finishing up the fuel line and other stuff.
Also added my wastegate,an Innovative Turbo Systems Pro Gate.This thing is not only beautifull,but huge compared to Turbonetics delta and racegates.

Steve

I've also updated the pics on the top of the page scince adding new intercooler hoses(red
),finishing up the fuel line and other stuff.Also added my wastegate,an Innovative Turbo Systems Pro Gate.This thing is not only beautifull,but huge compared to Turbonetics delta and racegates.

Steve
Hay steve looks awsome
, im gana try and go this root agin on the firebird in june when i get home from school for good
wyoming sucks i cant wait to get back to brooklyn.. ill have to look you up
, im gana try and go this root agin on the firebird in june when i get home from school for good
wyoming sucks i cant wait to get back to brooklyn.. ill have to look you up Thread Starter
Senior Member
Joined: Jun 2000
Posts: 645
Likes: 0
From: NY
Car: 2013 C63C
Engine: M156 (P31)
Transmission: 7 speed MCT
Axle/Gears: AMG Limited Slip
Update :)
Guys thanks again for the compliments - after all the hard work it's very apreciated 
EddieDellZ I bet ya miss the food huh? I know thats what I miss most when I'm away from home :hail: L&B Spumoni Gardens,I love that place
Drop me an email when ya get back
Anyway good news is the car is running and running great,I just gotta get an exhaust on it asap(it's ordered and on it's way from ATR).I've run stock turbo's with no exhaust before but with the larger turbo and exhaust housing it is just way louder than I expected.
Bad news is I'm a little tapped at the moment(buying another car)and can't get the 12 bolt rear right now,maybe not this year so it looks like I'll have to keep it on pump gas and launch softly to keep the stock rear in one piece,oh well I guess I can live with 11's for this year
Steve

EddieDellZ I bet ya miss the food huh? I know thats what I miss most when I'm away from home :hail: L&B Spumoni Gardens,I love that place
Drop me an email when ya get backAnyway good news is the car is running and running great,I just gotta get an exhaust on it asap(it's ordered and on it's way from ATR).I've run stock turbo's with no exhaust before but with the larger turbo and exhaust housing it is just way louder than I expected.
Bad news is I'm a little tapped at the moment(buying another car)and can't get the 12 bolt rear right now,maybe not this year so it looks like I'll have to keep it on pump gas and launch softly to keep the stock rear in one piece,oh well I guess I can live with 11's for this year

Steve
When people ask me what i miss about ny one of the things i allways say is food yeah spamonii gardens thats one of the first places im gana hit up in june i love that place especially in the summer. plus chinese food but the experiance taught me to just get up and cook my dinner lol i have a full kitchen in my dorm wyotech dorms are cool
ne way ill probably shoot you a email in 2 months lol later-Ed
Supreme Member
iTrader: (1)
Joined: Dec 1999
Posts: 4,335
Likes: 4
From: Mays Landing NJ
Car: 2018 Camaro SS
Engine: LT1 w/Paxton 1500SL
Nothing beats pizza from Brooklyn, Steve, where did we get it from that one time i was up, i think it was the day we did my bumper and nose clip...its up the street from you..
Thread Starter
Senior Member
Joined: Jun 2000
Posts: 645
Likes: 0
From: NY
Car: 2013 C63C
Engine: M156 (P31)
Transmission: 7 speed MCT
Axle/Gears: AMG Limited Slip
:hail: :hail: :hail: Roll 'n' Roaster
I love that place
hey wasnt this thread about my motor?!?!? Oh well it's raining like hell out today anyway 
Steve
I love that place
hey wasnt this thread about my motor?!?!? Oh well it's raining like hell out today anyway 
Steve
Supreme Member
iTrader: (1)
Joined: Dec 1999
Posts: 4,335
Likes: 4
From: Mays Landing NJ
Car: 2018 Camaro SS
Engine: LT1 w/Paxton 1500SL
Originally posted by TTA850
Yeah now your talkin - that was Mike's on 20th ave.Good pizza but great garlic knots

Steve
Yeah now your talkin - that was Mike's on 20th ave.Good pizza but great garlic knots

Steve
Thread
Thread Starter
Forum
Replies
Last Post





