When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I actually just had to replace my touch screen as my original ebay cheapy mock up screen finally crapped out after 4yrs lol.
Just started putting it in and havent finished filling in the openings.But screen fits well,shave maybe 1/4inch off the bottom of the screen case..just enough that the bottom screen buttons were.Its a Liliput high brightness anti glare screen.
Not hard to do..measure 3 times and cut once as they say lol.
I totally agree. I have an older similar DIN & 1/2 headunit. The fit is flush by both the height and the front doesn't stick out nearly as far.
Ironically, the following year Pioneer released a black unit which would have looked even cooler.
i...... have.... the... same... one... wow it came in my sport coupe how old are these? lol, i have a brand new sony for it tho, not a fan of it myself bc no aux or usb
Very cool. What modications did you have to do to the wiring harness? Was the antenna jack the same?
Hi, it came with a harness/adapter to fit my 87. The small antenna jack was also included. Only issue, was my power antenna came to life when i turned on ignition, even if the cd player was off. Just had to swap 2 cords in the harness. Installing the cd player in my console, involved som grinding of the mickey mouse ears infront of the player with a dremmel because they are a little larger than the stock cassette player. Also had to remove/grind som of the plastic inside/at the back of my concole as the new player is a little deeper than the stock. No big deal with a dremmel..
Hi, it came with a harness/adapter to fit my 87. The small antenna jack was also included. Only issue, was my power antenna came to life when i turned on ignition, even if the cd player was off. Just had to swap 2 cords in the harness. Installing the cd player in my console, involved som grinding of the mickey mouse ears infront of the player with a dremmel because they are a little larger than the stock cassette player. Also had to remove/grind som of the plastic inside/at the back of my concole as the new player is a little deeper than the stock. No big deal with a dremmel..
Just curious how that pioneer radio is doing and if you ever get HD stations with it. I just put a DEH 4400HD in mine but it never gets any HD stations that I can see?
I intended to buy this same face plate and I use to have the link on my iphone to buy these from the guy who makes them, but lost it! Can somebody send me a link or provide info so I can get one please?!
I intended to buy this same face plate and I use to have the link on my iphone to buy these from the guy who makes them, but lost it! Can somebody send me a link or provide info so I can get one please?!
Thanks a ton! Now I just need to know if I want the GTA illuminated above or below. I think I'd prefer below so the radio sits higher but I wonder which way has better clearance? I have the digital dash so I'll go red illumination.
Thanks a ton! Now I just need to know if I want the GTA illuminated above or below. I think I'd prefer below so the radio sits higher but I wonder which way has better clearance? I have the digital dash so I'll go red illumination.
YW As far as clearance goes in the radio pod, I think you are better off keeping the radio lower and the text above it. Seems like you would have to cut less of your radio pod out to make it fit. I went with the red illumination too. I can provide pics of how I had to cut my radio pod to get my radio installed with the HUmount if you need them.
When I had the same deck in mine, I had to cut the support behind the radio to get it to fit. Even then it was extremely tight, the thing had to be squeezed in by tightening the screws.
I did have an adaptor harness though, so there was a lot of extra wires back there. That was the main issue.
WiFi GPS 4.4 Android Touch Screen Ebay Chinese Unit.. A bit wider than US units, had to notch inner vent tubes and flip over old inner mount.. to slide it in.. example link - http://www.ebay.com/itm/151854406539?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Here's my 16 year old KDC-S3007 Kenwood Deck that still sounds great.(even has the detachable face)
CD Player is working strong and is pushing these speakers.
5.5in. Pioneers in the doors and 6x9 Pioneers in the sail panels.
Here's my 16 year old KDC-S3007 Kenwood Deck that still sounds great.(even has the detachable face)
CD Player is working strong and is pushing these speakers.
5.5in. Pioneers in the doors and 6x9 Pioneers in the sail panels.
Just finished 
As far as clearance goes in the radio pod, I think you are better off keeping the radio lower and the text above it. Seems like you would have to cut less of your radio pod out to make it fit. I went with the red illumination too. I can provide pics of how I had to cut my radio pod to get my radio installed with the HUmount if you need them. 
My Pioneer FH-X700BT 
[/QUOTE
