When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Tech / General EngineIs your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Does anyone know if there are small block Chevy valvecovers with Pontiac script on them that are still being made? Either in aluminum or chrome steel. These would look cool on a 3rd gen Fiebird/Formula/Trans-Am. I've seen them before but I did a search and can't find any.
Aside from setting up an alert on eBay in case anyone sells a set of the old cast "Pontiac" covers from GM Performance - part number 10093393, you may have to go the custom route. I've never used these folks, but they say pricing for SBCs start at $175.
I've looked for good options along these lines for a long time. There's virtually nothing out there. Maybe I'm missing them, but I'm not seeing anything on the Butler site that is SBC. And Undercoverinnovations.com clearly says they'll cut any pattern, except licensed logos.
Does anyone know if there are small block Chevy valvecovers with Pontiac script on them that are still being made? Either in aluminum or chrome steel. These would look cool on a 3rd gen Fiebird/Formula/Trans-Am. I've seen them before but I did a search and can't find any.
they need a good cleaning, i have had them on my 350 in a chevelle for the last 20 years. the motor came out of a 1984 15th anniversary trans am.[/QUOTE]
ARE THESE STILL FOR SALE ?
Last edited by CompSpec; Nov 26, 2020 at 05:28 PM.
do they suck in a lot of oil without having baffles on the pcv ?
you can get the grommits that have a baffle in them. should help as long as you orient the opening toward the bottom toward the exhaust side. maybe use a little silicone to lock them into place.
Found these recently and remembered this thread. Same company, Ansen, that offers the perimeter bolt valve covers a few posts up. These are the tall style. I personally prefer the short style/stock height, but tall would probably be more practical for most custom builds. Small Block Chevy Tall Vortec Center Bolt Valve Covers, Engraved With "Pontiac" | eBay
I know this is an old thread but here is a set of valve covers I found in a junk pile today. If anyone has any info on them I’m all ears. I’d like to put them on my ‘83 T/A but If the price is right I wouldn’t be opposed to selling either
I know this is an old thread but here is a set of valve covers I found in a junk pile today. If anyone has any info on them I’m all ears. I’d like to put them on my ‘83 T/A but If the price is right I wouldn’t be opposed to selling either
If you’re interested in selling them and you still have them, I’ll buy them right now. Shoot me a text @ 623-340-5395 and let me know please. I’m in Phoenix AZ.
I know this is an old thread but here is a set of valve covers I found in a junk pile today. If anyone has any info on them I’m all ears. I’d like to put them on my ‘83 T/A but If the price is right I wouldn’t be opposed to selling either
Old thread, but if anyone is still interested, these appear to be a set that was sold by Nationwise Auto Parts way back in the mid-'70s. That chain filed for bankruptcy and closed its doors on October 15, 1995. Subsequently, Advance Auto Parts bought many of the closed stores, and they are still in business today.
Old thread, but if anyone is still interested, these appear to be a set that was sold by Nationwise Auto Parts way back in the mid-'70s. That chain filed for bankruptcy and closed its doors on October 15, 1995. Subsequently, Advance Auto Parts bought many of the closed stores, and they are still in business today.
