How about a small Gathering for the swap meet Saturday, Nov. 10?
How about a small Gathering for the swap meet Saturday, Nov. 9?
So who is up for a small get-together Saturday (Nov. 10th)? I was thinking of meeting somewhere for lunch, then going over to the swapmeet afterwards. Anyone know of some restuarants local to the Ballpark area in Arlignton?
swap meet info here...
http://www.deanearhart.com
swap meet info here...
http://www.deanearhart.com
Last edited by 89ROC; Nov 4, 2002 at 12:05 PM.
Count me in. I will probably be out there in the morning, but I will ahve my cell phone with me. There are all kinds of restaraunts right there, but at Joe's crab shack you can park right next door to the swap meet
Jon
Jon
Trending Topics
Member
Joined: Jul 2002
Posts: 433
Likes: 0
From: Arlington, TX
Car: '88 GTA
Engine: TPI 350
Transmission: auto
i am going to the swap meet but i may be working early saturday afternoon
. in that case, lunch would be a problem. ill have to get back on you guys about that one.
jacob
p.s. are girlfriends allowed?
. in that case, lunch would be a problem. ill have to get back on you guys about that one.jacob
p.s. are girlfriends allowed?
Originally posted by tamu130
i am going to the swap meet but i may be working early saturday afternoon
. in that case, lunch would be a problem. ill have to get back on you guys about that one.
jacob
p.s. are girlfriends allowed?
i am going to the swap meet but i may be working early saturday afternoon
. in that case, lunch would be a problem. ill have to get back on you guys about that one.jacob
p.s. are girlfriends allowed?
And of course girlfriends are allowed! lol
I'm bringing mine
Senior Member
iTrader: (1)
Joined: Oct 1999
Posts: 779
Likes: 0
From: Carrollton, TX, USA
Car: 1992 Chevy Camaro RS
Engine: 305 TBI
Transmission: T-56
at this time...NTTGA still isnt sure how many people are going. I know a couple of us will be there atleast....but I don't know if it'll be enough to call it a NTTGA meet. A lot of our folk are going through a bunch of stuff right now....some may or may not be out of town...We're discussing it on the forums though....we'll let you know.
Oh and by the way...there is a car show on Dec. 7th....more info will be posted later today on our site. Should be fun...come check it out.
Oh and by the way...there is a car show on Dec. 7th....more info will be posted later today on our site. Should be fun...come check it out.
Senior Member
iTrader: (1)
Joined: Oct 1999
Posts: 779
Likes: 0
From: Carrollton, TX, USA
Car: 1992 Chevy Camaro RS
Engine: 305 TBI
Transmission: T-56
ok guys...I got SATURDAY THE 9TH OFF......the 10th is a Sunday...I was confused out of my mind....just wanting to confirm that it is SATURDAY.
Senior Member
Joined: Sep 1999
Posts: 545
Likes: 0
From: Fairfax, VA
Car: 1987 Trans Am
Engine: LT1
Transmission: T-56
Axle/Gears: 10 Bolt SLP Torsen, 3.73 ratio
?'s
Hey, I got a few questions for you experienced swap-meet guys.
1: What are the chances of finding a T-56?! My 700R4 blew up today...makes horrible noises and wont get out of 1st.....its very annoying going at around 25 MPH @ 4000 RPM.....
2: Do people trade stuff, or is it just all out sale?
I have the stock I think 26 spline axles out of my car, and a posi differential to get rid of....I was planning on selling them for a T-56....just not this soon
3: If ya'll think I have a good chance of finding a T-56 for about $500 + axles + differential, would it be possible for someone to swing up to Denton and give me a ride...as mine just blew up
, or if I manage to find a ride to somewhere near one of ya'll could I ride w/ you? Would you have room for a tranny?
Oh, one more thing....anyone have experience doing the swap....700R4->T56 that would maybe help me out with that....like in their garage (I have no place to work on it) Anyone want to try it on someone elses car before their own and have a garage? I know I'm asking alot here, I'm stuck though....
Thanks in advance.
Corry
1: What are the chances of finding a T-56?! My 700R4 blew up today...makes horrible noises and wont get out of 1st.....its very annoying going at around 25 MPH @ 4000 RPM.....
2: Do people trade stuff, or is it just all out sale?
I have the stock I think 26 spline axles out of my car, and a posi differential to get rid of....I was planning on selling them for a T-56....just not this soon
3: If ya'll think I have a good chance of finding a T-56 for about $500 + axles + differential, would it be possible for someone to swing up to Denton and give me a ride...as mine just blew up
, or if I manage to find a ride to somewhere near one of ya'll could I ride w/ you? Would you have room for a tranny?
Oh, one more thing....anyone have experience doing the swap....700R4->T56 that would maybe help me out with that....like in their garage (I have no place to work on it) Anyone want to try it on someone elses car before their own and have a garage? I know I'm asking alot here, I'm stuck though....
Thanks in advance.
Corry
Originally posted by CrashStitches
me and my buddy can't make it Saturday, is anyone gonna go on Sunday?
me and my buddy can't make it Saturday, is anyone gonna go on Sunday?
just private message me later on a time to meet up there or something......i try not to pass up seeing a nice looking thirdgen
james
Originally posted by mult68
ok guys...I got SATURDAY THE 9TH OFF......the 10th is a Sunday...I was confused out of my mind....just wanting to confirm that it is SATURDAY.
ok guys...I got SATURDAY THE 9TH OFF......the 10th is a Sunday...I was confused out of my mind....just wanting to confirm that it is SATURDAY.
Yup it's Saturday, <font size=4>Nov. 9th</font>, not the 10th. Sorry for the confusion. Re: ?'s
Originally posted by Corry
Hey, I got a few questions for you experienced swap-meet guys.
1: What are the chances of finding a T-56?! My 700R4 blew up today...makes horrible noises and wont get out of 1st.....its very annoying going at around 25 MPH @ 4000 RPM.....
2: Do people trade stuff, or is it just all out sale?
I have the stock I think 26 spline axles out of my car, and a posi differential to get rid of....I was planning on selling them for a T-56....just not this soon
3: If ya'll think I have a good chance of finding a T-56 for about $500 + axles + differential, would it be possible for someone to swing up to Denton and give me a ride...as mine just blew up
, or if I manage to find a ride to somewhere near one of ya'll could I ride w/ you? Would you have room for a tranny?
Oh, one more thing....anyone have experience doing the swap....700R4->T56 that would maybe help me out with that....like in their garage (I have no place to work on it) Anyone want to try it on someone elses car before their own and have a garage? I know I'm asking alot here, I'm stuck though....
Thanks in advance.
Corry
Hey, I got a few questions for you experienced swap-meet guys.
1: What are the chances of finding a T-56?! My 700R4 blew up today...makes horrible noises and wont get out of 1st.....its very annoying going at around 25 MPH @ 4000 RPM.....
2: Do people trade stuff, or is it just all out sale?
I have the stock I think 26 spline axles out of my car, and a posi differential to get rid of....I was planning on selling them for a T-56....just not this soon
3: If ya'll think I have a good chance of finding a T-56 for about $500 + axles + differential, would it be possible for someone to swing up to Denton and give me a ride...as mine just blew up
, or if I manage to find a ride to somewhere near one of ya'll could I ride w/ you? Would you have room for a tranny?
Oh, one more thing....anyone have experience doing the swap....700R4->T56 that would maybe help me out with that....like in their garage (I have no place to work on it) Anyone want to try it on someone elses car before their own and have a garage? I know I'm asking alot here, I'm stuck though....
Thanks in advance.
Corry
2. Most of the time people strictly want to sell, not trade. But I'm sure there's a few who would trade. They wouldn't give much for a posi and axles though.
3. I did the T56 swap in my 89 IROC I used to have. I have access to a shop with a lift and all, but the owner of the shop will charge $$$ for the time spent in there.
I'm sending you a PM now.
Senior Member
Joined: Sep 1999
Posts: 545
Likes: 0
From: Fairfax, VA
Car: 1987 Trans Am
Engine: LT1
Transmission: T-56
Axle/Gears: 10 Bolt SLP Torsen, 3.73 ratio
Is there anyone on here from the Denton Area, or that would be willing to drive up here? I already got a ride down there, so all I really need is a ride back, possibly with a transmission. Oh yeah, and I'd need a ride from Hooters to the Swapmeet.
Please I'm on me knees here!:hail:
Corry
EDIT: Forgot to mention, I will pay gas
Please I'm on me knees here!:hail:
Corry
EDIT: Forgot to mention, I will pay gas
Member
Joined: Jul 2002
Posts: 433
Likes: 0
From: Arlington, TX
Car: '88 GTA
Engine: TPI 350
Transmission: auto
wont be able to meet you guys sat. got a ticket to the texas a&m vs. oklahoma game then. im a big aggie so im not gonna miss this one. ill diffenetally be there bright and early sun though. if anyone is gonna be there then, let me know and we can have our own lunch or something. we'll say 11:30 just to be different. get back to me if your interested.
later everyone and good luck finding stuff sat,
jacob
p.s. if anyone finds a good value on a 350, buy it for me
later everyone and good luck finding stuff sat,
jacob
p.s. if anyone finds a good value on a 350, buy it for me
Senior Member
iTrader: (1)
Joined: Oct 1999
Posts: 779
Likes: 0
From: Carrollton, TX, USA
Car: 1992 Chevy Camaro RS
Engine: 305 TBI
Transmission: T-56
Also those people interested in joining NTTGA...or those who will be paying their dues....look for me (Joel)....Teal RS
Senior Member
Joined: Sep 1999
Posts: 545
Likes: 0
From: Fairfax, VA
Car: 1987 Trans Am
Engine: LT1
Transmission: T-56
Axle/Gears: 10 Bolt SLP Torsen, 3.73 ratio
Well looks like I am go....I am also going to try and get a short term loan on my next paycheck just to insure I can afford the trans, and maybe more hardware, hell might find a mounting bracket there lol.
I really dont like the idea that my trans blew up on me, but man am I excited about gettin the t56.....I wasn't planning on the swap until april of next year hehe, now its just too cool! Cant wait till tomorrow! Se ya'll there!
BTW, just in case I look real stupid looking for ya'll, I'm tall like 6'4" long dark hair, usually dress dark, so if you see this big oaf looking stupidly around for everyone, give me a yell!
I'll probably be carrying a small cardboard box containing a diff, so that should make me easy to sopt
I really dont like the idea that my trans blew up on me, but man am I excited about gettin the t56.....I wasn't planning on the swap until april of next year hehe, now its just too cool! Cant wait till tomorrow! Se ya'll there!
BTW, just in case I look real stupid looking for ya'll, I'm tall like 6'4" long dark hair, usually dress dark, so if you see this big oaf looking stupidly around for everyone, give me a yell!
I'll probably be carrying a small cardboard box containing a diff, so that should make me easy to sopt
Good to see you all there! Sorry I was 2 1/2hrs late
I picked up a Mac tool box, and almost have it ready to be re-painted.
That thing was all banged up and rusted, etc etc But it's looking a lot better now
I also got some other Snap-on sockets
I think we should start doing these Gatherings EVERY swapmeet from now on.
Jason
Also I am ho rrible with names. I know James' car, and Joel's car. Who had the other 2 cars? It's just hard to put screen names with faces with cars..
I picked up a Mac tool box, and almost have it ready to be re-painted.
That thing was all banged up and rusted, etc etc But it's looking a lot better nowI also got some other Snap-on sockets
I think we should start doing these Gatherings EVERY swapmeet from now on.

Jason
Also I am ho rrible with names. I know James' car, and Joel's car. Who had the other 2 cars? It's just hard to put screen names with faces with cars..
Senior Member
iTrader: (1)
Joined: Oct 1999
Posts: 779
Likes: 0
From: Carrollton, TX, USA
Car: 1992 Chevy Camaro RS
Engine: 305 TBI
Transmission: T-56
Katie had the white TA...dont think you were there when daniel was there...and Erik had the Gray Roc. By the way....when we met up with you guys...I was out buying that shop manual....didnt get a chance to say hello...and the rest of the day i was just out of it....when you were leaving i was like....oh crap I never even said hi to him. Sorry about that....it was a tough weekend.
Sorry I missed you Jason. We parked behind Red Hot and Blue, and lost the rest of the group. There sure were a lot of people out there. I think we walked about half of the swap meet, but didn't really buy much.
Jon
Jon
Originally posted by mult68
Katie had the white TA...dont think you were there when daniel was there...and Erik had the Gray Roc. By the way....when we met up with you guys...I was out buying that shop manual....didnt get a chance to say hello...and the rest of the day i was just out of it....when you were leaving i was like....oh crap I never even said hi to him. Sorry about that....it was a tough weekend.
Katie had the white TA...dont think you were there when daniel was there...and Erik had the Gray Roc. By the way....when we met up with you guys...I was out buying that shop manual....didnt get a chance to say hello...and the rest of the day i was just out of it....when you were leaving i was like....oh crap I never even said hi to him. Sorry about that....it was a tough weekend.
pics
I finally got those pics from the swap meet....sorry it took so long but my computer was down for about a month...now im having problems with posting the pics
anybody know a good FREE website hosting that allows Hot-Linking or direct linking (Whatever you wanna call it)
anybody know a good FREE website hosting that allows Hot-Linking or direct linking (Whatever you wanna call it) Last edited by jcjohnston78; Dec 3, 2002 at 11:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
xbmx89
South Central Region
4
Oct 31, 2015 10:59 AM





