I am looking for other 3rd gen camaro owners around my area to see what they are into with there 3rd gen. I own a 1985 z28 that is only half way done i have a suped up 305 with a turbo 350 trans about to be pulled out and i am in the prosess of building a 383 with a turbo 400 to put in its place
the body has a hard wood set on hood with the door handels shaved and is in primer interior i just gutted and am about to git to the apolstree shop.
im bulding this for street show and drag.

 

I'm outside of Ft Smith, where are you at?

 

Hey, I live in Little Rock.
I am daily driving a 350tpi 89 IROC Z Camaro. I have some work to do, but I am not really equiped for.

 

I'm near Jonesboro, I was wondering if anyone in our area(s) has any leads on a good running 1986 - 1992 Camaro z28 "driver"? Or Trans Am?

Not really looking for anything I have to put immediate work in.

 

May be you can register to http://www.wtfba.org/forums/index.php (memphis). Sometimes, you can find good deals.
A Pontiac forum in Arkansas : http://www.arkansaspontiacs.org/apaforums2/
I have found mine in Tulsa OK.

 

Thanks, I'll do that

 

Whats up sorry its been a few days sens i checked the thread but i been busy....any ways the preditor aint in primer know more paint laid down good me and my bro got after it at 7:00am and i put the last clear coat on at 10 till 5 i just cant wait to buff her

 

NEEDINPUT
I woul like to have a arkansas meet but i dont know if there is enough of us 3rd blooded gearheads in arkansas. I would be willing to git the local drag track in to let us have a show and race.. pm me if any one is interested and if yall know any of us in arkansas spred the word

 

Im looking for a scrap yard here in arkansas that has 3rd gens all the ones around here have no later than 2000 models any more i am a outside salesman so i travel the state alot so any input will help i am needing a good head liner to wrap for a full top and a set of door panels any help will be appreciated as always

 

Im near Mountain Home, AR No Camaro as of right now but the current count is 32 F Bodies in the last 7 years. Im currently looking for a L98 IROC. I have owned alot of parts cars and looking into getting back into that as well as I now have the land to do it.

Joey

 

http://camaromotorsports.tripod.com/ In searcy, a bunch of camaro and firebird 3rd and 4th gen. Call Brad.

 

Any of you guys know of anyone with a Firebird looking for a 4th generation style Trans Am spoiler?

I bought one and modified it to fit my 85 Firebird and never got around to using it.

It would cost a fortune to ship, but I figure someone close by might want to buy it.

I'll take $75 for it, if someone wants to come pick it up.

 

Gee, I was beginning to think I was the only one here... I moved out here from central California a couple of years ago and have talked to a couple of guys with 3rd gens in this area but they don't know about TGO. Any of you guys be interested in a small meet and greet some weekend? I'm about 40 miles south of Little Rock and but don't mind driving.

I have an '88 Iroc that's currently on stands getting new steering, suspension, bushings, tires, T56, gauges, and a few other odds and ends. Itching to take it out as the weather starts to turn nice....

 

Sure, but I wont be available for one month.

 

That's no problem for me... I just finished a new all aluminum radiator install too! I've been toting parts around for quite a long time without any place dry to work on my car. Now I'm finally able to get to some of it and I've got a pretty good back log! I'm hoping to be done within a month.

I need to locate an engine builder that can help me ensure I've got everything setup right. Then I'll be ready to drop my 350 w/ superram and vortec heads and start learning to tune. This year will be a good one for my car.

So, anyone else up for a small gtg in a month or two?

 

meet sounds good just let me know when and where

 

I will go to Maumelle tomorrow.
http://www.arkansaspontiacs.org/Unse...s/show2009.pdf

 

I build my car with money i make out of my shop here at my house. I do paint and body work, Mechanical and electrical work so if any of yall know any one needing some work to be done im in russelville and im cheap

 

is anyone near nw arkansas
looking to get together for a meet

 

If you guys are interested, we could plan a small gtg the first weekend in May and a central location. I don't mind driving. Might be fun to hit drag races in Centerville or something. Post up with some ideas if you're interested.

 

Centerville sounds good to bad mine wont be ready to run but i live by russellville so its close and im there most weekends any way

 

mine isn't ready to run either... i just thought it might be fun to do a small q and watch some races.

is there a small public park anywhere nearby?

 

YA IN DARDNELL ABOUT 8 OR 9 MILES BUT LAKE DARDNELL IS ABOUT 15 MILES WERE THEY HAVE A PAVILIAN AND SOME GRILLS

 

hello all just wanted to say i bought my first 3rd gen. im in fayetville ar. add another one to the ranks. lol

 

im in paragould

 

texarkana third genner here-92 formula 350) there has to be a time and place we can get together---whose in?? there has to be some more of us out there---where ya at shreveport---east texas--lets do this

 

I know where there's a beautiful '91 Z28 vert in Hot Springs...because he backed out of selling it to me after I drove five hours to pick it up!!

 

That sucks... Batesville, AR here.

 

Check out the
Arkansas Thirdgen Camaro/Firebird page

on facebook

 

well when anyone decides to actually do something besides talking about it,, please send me a message---

 

A Facebook group instead of fan page would be better... I'm not at a time where I could meet up most likely.

 

im in fort smith and i just bought a fully stock 86 berlinetta i would be down to meet just inbox me the info..

 

I unfortunately live in Hellison (Harrison), Ar and proud owner of an 87 Trans Am GTA. Im down to meet have a meet up sometime come spring. Ill be running the T/A up at Ozark Raceway Park come spring/summer/fall