SWMG !
SWMG !
The gathering date is finally set for 9/14-15.
Friday nite (9/14) we will all meet around 6-8pm at the Texas Motorplex to run the 1/4mi.
Saturday morning we will meet at the Ballpark in Arlington TX. If we can get there by 9am, there should be enough room for all the cars in the back of the West parking lot. If not, then we should be in the East parking lot. If anyone has trouble finding it, I have a cell phone. Just e-mail me at JasonZZ3@cs.com and I'll give you the number.
I think several others here also have a cell, so post the #'s if you want.
After the swapmeet we can all go out to eat, or have a cookout at a park.
Just post a reply here letting us know if youre coming to the gathering, and if you would rather go out to eat, or have a B-B-Q.
Thanx!
See you all soon!
-Jason
------------------
89' pearl blue Camaro Iroc-Z
355/6-spd
Not stock...
------------------
97' black Pontiac Trans Am
LT1, A4, free mods, CAI,
HPP3+, Flowmaster catback, 3.42's.
100hp Nitrous.
Friday nite (9/14) we will all meet around 6-8pm at the Texas Motorplex to run the 1/4mi.
Saturday morning we will meet at the Ballpark in Arlington TX. If we can get there by 9am, there should be enough room for all the cars in the back of the West parking lot. If not, then we should be in the East parking lot. If anyone has trouble finding it, I have a cell phone. Just e-mail me at JasonZZ3@cs.com and I'll give you the number.
I think several others here also have a cell, so post the #'s if you want.
After the swapmeet we can all go out to eat, or have a cookout at a park.
Just post a reply here letting us know if youre coming to the gathering, and if you would rather go out to eat, or have a B-B-Q.
Thanx!
See you all soon!
-Jason
------------------
89' pearl blue Camaro Iroc-Z
355/6-spd
Not stock...
------------------
97' black Pontiac Trans Am
LT1, A4, free mods, CAI,
HPP3+, Flowmaster catback, 3.42's.
100hp Nitrous.
Senior Member


Joined: Jul 1999
Posts: 857
Likes: 45
From: Batesville, AR 72501 USA
Car: '88 Bright Red GTA UPC 81U
Engine: 5.7L TPI
Transmission: 700R4
Axle/Gears: 3.27:1
This itenerary looks good to me. At present, I should be able to attend the weekend's festivities. It's already cleared with my "homefront bosses" here.... 
I had hoped for a trip to TMS's September Charity Laps as well, but a friend's cancer surgery is going to prevent that anyway.... so this weekend it is!
I haven't been able to make a SWMG in a while; I'm looking forward to seeing you all again....
------------------
Frankie Rider, 2
The GTA Source Page
-----------------------
'88 GTA Red Hatchback - 5.7L/A4
'88 GTA Black Notchback - 5.7L/A4
'88 GTA Gunmetal Hatchback - 5.0L/A4

I had hoped for a trip to TMS's September Charity Laps as well, but a friend's cancer surgery is going to prevent that anyway.... so this weekend it is!
I haven't been able to make a SWMG in a while; I'm looking forward to seeing you all again....
------------------
Frankie Rider, 2
The GTA Source Page
-----------------------
'88 GTA Red Hatchback - 5.7L/A4
'88 GTA Black Notchback - 5.7L/A4
'88 GTA Gunmetal Hatchback - 5.0L/A4
Member
Joined: Jul 1999
Posts: 188
Likes: 0
From: Arlington,Texas,USA
Car: 1991 Z28 1LE
Engine: 305
Transmission: 5 Speed
<font face="Verdana, Arial" size="2">Originally posted by FrankieRider2:
I should be able to attend the weekend's festivities. It's already cleared with my "homefront bosses" here....
I'm looking forward to seeing you all again....
</font>
I should be able to attend the weekend's festivities. It's already cleared with my "homefront bosses" here....

I'm looking forward to seeing you all again....
</font>
!!!Gregg
Hello
Looks like I will be there.
96% Positive I will be there.
But I will be cruzing in my 00 TA, I haven't fixed the Iroc yet(intake valves).
Hope you guys don't mind a 4th gen hanging around.
Oh ya if anyone has maps or the yahoo dorections to the ballpark and the motorplex please post it. I can't exactly remember the roads up there.
------------------
Jamieson
2000 NBM TransAm WS6 #485
85 Blue Super Charged Iroc-Z28 Camaro
79 TransAm
1999 Oklahoma Gathering
2000 SWMG
2001 SWMG
[This message has been edited by Jason 85 IrocZ (edited August 17, 2001).]
Looks like I will be there.
96% Positive I will be there.
But I will be cruzing in my 00 TA, I haven't fixed the Iroc yet(intake valves).
Hope you guys don't mind a 4th gen hanging around.
Oh ya if anyone has maps or the yahoo dorections to the ballpark and the motorplex please post it. I can't exactly remember the roads up there.
------------------
Jamieson
2000 NBM TransAm WS6 #485
85 Blue Super Charged Iroc-Z28 Camaro
79 TransAm
1999 Oklahoma Gathering
2000 SWMG
2001 SWMG
[This message has been edited by Jason 85 IrocZ (edited August 17, 2001).]
It may be my first outting in the D/FW area!. I'm moving up on monday.. I'll become a regular at the SWMG's.. l8r.
Anthony
------------------
previous ride: 87 Camaro LT
350, A4.Comp Cams 268H, Edelbrock Preformer intake, Hedman Headers and y-pipe, gutted cat, No AIR/smog pump. 14x3" Open element K&N, Q-jet w/ D hanger and DA rods, adjusted AV spring tension and quick can.
Current ride: 1992 Camaro RS, K&N, Flowmaster, 305, T5, Black, T-tops, 76k miles.
Anthony
------------------
previous ride: 87 Camaro LT
350, A4.Comp Cams 268H, Edelbrock Preformer intake, Hedman Headers and y-pipe, gutted cat, No AIR/smog pump. 14x3" Open element K&N, Q-jet w/ D hanger and DA rods, adjusted AV spring tension and quick can.
Current ride: 1992 Camaro RS, K&N, Flowmaster, 305, T5, Black, T-tops, 76k miles.
Trending Topics
Member

Joined: Jul 1999
Posts: 363
Likes: 59
From: Poteau, OK, USA - Age: 44 - AKA 84TAVeRT
Car: 1984 Trans Am Convertible
Engine: 355
Transmission: WCT5
Axle/Gears: 3.73
i will probably have the ttop car back together...
looks like i might be getting the engine back in by then...
the tranny will be back in the vert next weekend...
i am getting a B&M or Ripper shifter for the T5... and putting a 140 mph speedo in the vert...
well see yall round...
later,
Chris
looks like i might be getting the engine back in by then...
the tranny will be back in the vert next weekend...
i am getting a B&M or Ripper shifter for the T5... and putting a 140 mph speedo in the vert...
well see yall round...
later,
Chris
Damn! I have two weddings to try and attend on the 15th. Well, looks like I'm shooting for a spring SWMG. Have fun guys, I was hoping to make it but I was just informed last week of a wedding on the 8th and two on the 15th I have to attend so there's just no way.
------------------
Kyle Osterholt
Okarche, Oklahoma
ASE Master Certified
86 T/A 383 TPI
89 TTA #1002 T-top/Leather
89 TTA #1358 Hardtop/Leather
80 T/A Pace Car
73 Opel GT
73 bronco
2000 Ducati 996 Monoposto
------------------
Kyle Osterholt
Okarche, Oklahoma
ASE Master Certified
86 T/A 383 TPI
89 TTA #1002 T-top/Leather
89 TTA #1358 Hardtop/Leather
80 T/A Pace Car
73 Opel GT
73 bronco
2000 Ducati 996 Monoposto
Member
Joined: Jul 2000
Posts: 186
Likes: 0
From: Plano, Tx United States
Car: 92 Camaro RS
Engine: LT1
Transmission: T56
There might be a freshly reassembled/painted RS that'll be there....we'll see how this month goes. /me crosses fingers.
------------------
'92 RS convertible with LT1/t56, slp headers, 3" high flow cat, 3" flowmaster w/2.5" outlets/reprogrammed computer, k&n filters, "modified" eibach springs, kyb shocks&struts, polygraphite bushings, custom subframe connectors, and 4.10 gears.
------------------
'92 RS convertible with LT1/t56, slp headers, 3" high flow cat, 3" flowmaster w/2.5" outlets/reprogrammed computer, k&n filters, "modified" eibach springs, kyb shocks&struts, polygraphite bushings, custom subframe connectors, and 4.10 gears.
<font face="Verdana, Arial" size="2">Originally posted by Jason 85 IrocZ:
Hope you guys don't mind a 4th gen hanging around.
</font>
Hope you guys don't mind a 4th gen hanging around.
</font>

I bet 1/4 of the cars this time will be 4th gens.

BTW I might be selling my thirdgen

------------------
89' pearl blue Camaro Iroc-Z
355/6-spd
Not stock...
------------------
97' black Pontiac Trans Am
LT1, A4, free mods, CAI,
HPP3+, Flowmaster catback, 3.42's.
100hp Nitrous.
Does any know a Chris Carisle? I did to get hold of him as he has failed to ship or even contact me on the spoiler I won on EBAY.Thanks for you help.
------------------
Kick the tires and light the fires big daddy
------------------
Kick the tires and light the fires big daddy
I should be there.
I'll bring both cars too. Although I'm not opening the hood of the Iroc, it looks sad without a S/C.
------------------
1988 Formula L98
1988 IROC-Z supercharged
http://www.shsu.edu/~stdvjs11
I'll bring both cars too. Although I'm not opening the hood of the Iroc, it looks sad without a S/C.
------------------
1988 Formula L98
1988 IROC-Z supercharged
http://www.shsu.edu/~stdvjs11
<font face="Verdana, Arial" size="2">Originally posted by Val:
I should be there.
I'll bring both cars too. Although I'm not opening the hood of the Iroc, it looks sad without a S/C.
</font>
I should be there.
I'll bring both cars too. Although I'm not opening the hood of the Iroc, it looks sad without a S/C.
</font>
Cool, ya wanna do another B-B-Q @ the park?
------------------
89' pearl blue Camaro Iroc-Z
355/6-spd
Not stock...
------------------
97' black Pontiac Trans Am
LT1, A4, free mods, CAI,
HPP3+, Flowmaster catback, 3.42's.
100hp Nitrous.
What will be going on that weekend I need to know if it would be worth it for me to come?
------------------
97 formula w/6speed,cags skipshift eleminator, hurst billet pro shifter, 30#injectors,adjustiable fuel presure regulator,Moroso cold air induction,ported mass air sensor,accell300+ ignition box, accell 9000 wires, bosch platnum4 plugs,flomaster crossflow muffler,Lingenfiter 52mm throttle body,TPIS L98 SuperProfile cam,Crane 1:6 full roller rockers,Edelbrock subframe connectors,Edelbrock strut tower brace.
Other car is a 89 GTA w/700r4w/stage 2 shift kit, corvette servo, B&M mega shifter, TPIS bigmouth intake, TPIS large tube runners, TPIS 52mm throttle body,Edelbrock ported centerbolt heads,LT1 24# injectors,GMPP LT4 hotcam,CompCams Pro magnum roller rockers,Edelbrock headers, flowmaster crossflow muffler,MSD 6A, accell coil, bosch platnum plugs, this car is currently under rebuild and restoration.
------------------
97 formula w/6speed,cags skipshift eleminator, hurst billet pro shifter, 30#injectors,adjustiable fuel presure regulator,Moroso cold air induction,ported mass air sensor,accell300+ ignition box, accell 9000 wires, bosch platnum4 plugs,flomaster crossflow muffler,Lingenfiter 52mm throttle body,TPIS L98 SuperProfile cam,Crane 1:6 full roller rockers,Edelbrock subframe connectors,Edelbrock strut tower brace.
Other car is a 89 GTA w/700r4w/stage 2 shift kit, corvette servo, B&M mega shifter, TPIS bigmouth intake, TPIS large tube runners, TPIS 52mm throttle body,Edelbrock ported centerbolt heads,LT1 24# injectors,GMPP LT4 hotcam,CompCams Pro magnum roller rockers,Edelbrock headers, flowmaster crossflow muffler,MSD 6A, accell coil, bosch platnum plugs, this car is currently under rebuild and restoration.
i should be able to make it on fri night for ennis but i work on satudays...at least 1 place is better than none.
------------------
1982 Camaro SC
ATX Racing DFW Chapter
Texas Street Racers
------------------
1982 Camaro SC
ATX Racing DFW Chapter
Texas Street Racers
the move is all final, I'm living in Arlington now. where's the street scene in the D/FW area? I drove around 30 and 35 today, didn't see anything, but I guess I wasn't looking very hard.
I'll be at the SWMG, the ballpark is like 3 blocks away.
I'll be at the SWMG, the ballpark is like 3 blocks away.
Senior Member
Joined: Sep 1999
Posts: 545
Likes: 0
From: Fairfax, VA
Car: 1987 Trans Am
Engine: LT1
Transmission: T-56
Axle/Gears: 10 Bolt SLP Torsen, 3.73 ratio
Well depending on condition of my car, weather, money, etc, I might be down for both. Right now I still need 2 new tires, O2 sensor (either conencted properly or rerplaced), Vacume/Pressure problem resolved. If all that gets fixed, I will definatly want to re-run my car on the 1/4 mile, and hope it can redeem itself after it's extreamily poor performance last time! If not, but money's good, I will try and make it down for saturday.
Corry
Corry
Junior Member
Joined: Jul 1999
Posts: 85
Likes: 0
From: Frisco,TX,,USA
Car: 1984 Z28 H.O.
Engine: 406cid
Transmission: 6 speed
Axle/Gears: Strange 12 bolt 3.73
I will be there I just got my car running again last tuesday. Thanks to Jason.
------------------
Mark B.
1984 Z28 5.0. Liter H.0. with 17" Fikse FM/5's
Winner Best Exterior Third Gen. 1999 National Gathering
Also Published in CAMARO a MBI publishing co. book by Anthony Young
2000 Dakota R/T Intense Blue Regular Cab
with 18" Budnik Prism 6's
http://community.webshots.com/user/z28ho
http://www.cfcc-dfw.org/members/140.html
------------------
Mark B.
1984 Z28 5.0. Liter H.0. with 17" Fikse FM/5's
Winner Best Exterior Third Gen. 1999 National Gathering
Also Published in CAMARO a MBI publishing co. book by Anthony Young
2000 Dakota R/T Intense Blue Regular Cab
with 18" Budnik Prism 6's
http://community.webshots.com/user/z28ho
http://www.cfcc-dfw.org/members/140.html
gee my post seemed of disapeered.---
So is there gonna be anything going on at ennis besides running the 1/4, or is it all being saved for saturday. and is the BBQ gonna be at the ball park? if so wut time?
------------------
88' GTA 350 MODS---> air foil, K&N, Shift Kit, 180* therm, TB bypass, Gutted CAT
So is there gonna be anything going on at ennis besides running the 1/4, or is it all being saved for saturday. and is the BBQ gonna be at the ball park? if so wut time?
------------------
88' GTA 350 MODS---> air foil, K&N, Shift Kit, 180* therm, TB bypass, Gutted CAT
<font face="Verdana, Arial" size="2">Originally posted by breathment:
So is there gonna be anything going on at ennis besides running the 1/4, or is it all being saved for saturday. and is the BBQ gonna be at the ball park? if so wut time?
</font>
So is there gonna be anything going on at ennis besides running the 1/4, or is it all being saved for saturday. and is the BBQ gonna be at the ball park? if so wut time?
</font>
Everything else is taking place Saturday.
IF we have a BBQ, it will probably be at a local park. Randol Mill park is where we held it last year, and it turned out great!
If not, then we will just go out to eat at a restaurant nearby.
The only thing we're doing at the ballpark is going to the swapmeet (from 9am until about noon). Of course we can take some pics, etc after lunch.
<font face="Verdana, Arial" size="2">Originally posted by 89ROC:
IF we have a BBQ, it will probably be at a local park. Randol Mill park is where we held it last year, and it turned out great!
</font>
IF we have a BBQ, it will probably be at a local park. Randol Mill park is where we held it last year, and it turned out great!
</font>

------------------
88' GTA 350 MODS---> air foil, K&N, Shift Kit, 180* therm, TB bypass, Gutted CAT
Member
Joined: Jul 1999
Posts: 188
Likes: 0
From: Arlington,Texas,USA
Car: 1991 Z28 1LE
Engine: 305
Transmission: 5 Speed
It is west of the BallPark,but before Randol
Mill gets to Green Oaks.Very easy to find.
Gregg
http://www.1le.org
Mill gets to Green Oaks.Very easy to find.
Gregg
http://www.1le.org
so why don't we have just a plain F-body meet, instead of a third gen F-body meet? or is it gonna be a total f-body meet? in other words, should i invite the 4th gen buddies to bring their cars?
------------------
88' GTA 350 MODS---> air foil, K&N, Shift Kit, 180* therm, TB bypass, Gutted CAT
------------------
88' GTA 350 MODS---> air foil, K&N, Shift Kit, 180* therm, TB bypass, Gutted CAT
Member
Joined: Jul 1999
Posts: 188
Likes: 0
From: Arlington,Texas,USA
Car: 1991 Z28 1LE
Engine: 305
Transmission: 5 Speed
<font face="Verdana, Arial" size="2">Originally posted by breathment:
so why don't we have just a plain F-body meet, instead of a third gen F-body meet? or is it gonna be a total f-body meet? in other words, should i invite the 4th gen buddies to bring their cars?
</font>
so why don't we have just a plain F-body meet, instead of a third gen F-body meet? or is it gonna be a total f-body meet? in other words, should i invite the 4th gen buddies to bring their cars?
</font>
------------------
92 Formula L98- FOR SALE
96 Formula-FOR SALE
99 Trans Am
www.zainobros.com
www.greatbrakes.com
Member

Joined: Jul 1999
Posts: 363
Likes: 59
From: Poteau, OK, USA - Age: 44 - AKA 84TAVeRT
Car: 1984 Trans Am Convertible
Engine: 355
Transmission: WCT5
Axle/Gears: 3.73
yeah... that was so funny when Matt raced the icecream truck... 
LOL...
i hope we have good weather that weekend...
later,
Chris

LOL...

i hope we have good weather that weekend...
later,
Chris
so just wondering, have yall let the other people know about it, like other message boards, f-body.com etc. or is this a known thing that most people know about anyways?
------------------
- David
88' GTA 350 MODS---> air foil, K&N, Shift Kit, 180* therm, TB bypass, Gutted CAT
------------------
- David
88' GTA 350 MODS---> air foil, K&N, Shift Kit, 180* therm, TB bypass, Gutted CAT
I'd like to come & hang out with you guys again, but my car isn't running good (tranny is dying + misc electrical gremlins), not to mention I'd be too embarrassed to show up with my car with the way it looks
I'll deinitely come in the spring when have my new car (won't be an f-body, though
). hopefully i can work something out, but don't count on it
I'll deinitely come in the spring when have my new car (won't be an f-body, though
). hopefully i can work something out, but don't count on it
dude you need to keep your head up and junk. I still think you should shoot for an F body. Anyway, try to make it, if not, 3 laps is on Sept 29th. Call me sometime dude!
Dont forget about spring break too...
Dont forget about spring break too...
Cody, you're a Zaino dealer correct? Now that my car looks like this...
(Yes, I like posting this picture)
...I'll need some Zaino for it. I'm not sure exactly what I need, as the paint is brand new and has not had any wax applied yet. If you could get back with me on what I need, I would love to be able to just purchase the stuff directly from you at the meet. Maybe we could turn part of this meet into a Zaino party
(Yes, I like posting this picture)...I'll need some Zaino for it. I'm not sure exactly what I need, as the paint is brand new and has not had any wax applied yet. If you could get back with me on what I need, I would love to be able to just purchase the stuff directly from you at the meet. Maybe we could turn part of this meet into a Zaino party
<font face="Verdana, Arial" size="2">Originally posted by Brad:
Cody, you're a Zaino dealer correct? Now that my car looks like this...
...I'll need some Zaino for it. I'm not sure exactly what I need, as the paint is brand new and has not had any wax applied yet. If you could get back with me on what I need, I would love to be able to just purchase the stuff directly from you at the meet. Maybe we could turn part of this meet into a Zaino party
</font>
Cody, you're a Zaino dealer correct? Now that my car looks like this...
...I'll need some Zaino for it. I'm not sure exactly what I need, as the paint is brand new and has not had any wax applied yet. If you could get back with me on what I need, I would love to be able to just purchase the stuff directly from you at the meet. Maybe we could turn part of this meet into a Zaino party
</font>
Doubtful on the Zaino Party, we'll be at Tx Motor Speedway most of the weekend drinking and sleeping and watching races. heh... 84TAVert, his bro, my freind Beaver and I will be there sat morning tho, and probably can make it to Ennis fri night now.
Brad-
Also, you will need the following:
Z1 Pre Cleaner and Gloss Conditioner
Z2 or Z5 Polish, or both.
Z6 Gloss Enhancer Spray
Z7 Car Wash
Z18 Clay Bar
Z2 is Polish For Clear Coat. What I like to do on red paint is start with 3-5 coats of Z5 Polish For Light Scratches and Swirl Marks, then continue with Z2 Polish.
If you would like help with the application, I could either:
Polish the entire car for the friends and family rate
of $70.
Help you for a reduced charge of $30.
Of course, I'm no 'Zaino Expert', I just have 2 1/2 years experience with the stuff and can help with most any questions you have.
------------------
92 Formula L98- FOR SALE
96 Formula-FOR SALE
99 Trans Am
www.zainobros.com
www.greatbrakes.com
Also, you will need the following:
Z1 Pre Cleaner and Gloss Conditioner
Z2 or Z5 Polish, or both.
Z6 Gloss Enhancer Spray
Z7 Car Wash
Z18 Clay Bar
Z2 is Polish For Clear Coat. What I like to do on red paint is start with 3-5 coats of Z5 Polish For Light Scratches and Swirl Marks, then continue with Z2 Polish.
If you would like help with the application, I could either:
Polish the entire car for the friends and family rate
of $70. Help you for a reduced charge of $30.
Of course, I'm no 'Zaino Expert', I just have 2 1/2 years experience with the stuff and can help with most any questions you have.
------------------
92 Formula L98- FOR SALE
96 Formula-FOR SALE
99 Trans Am
www.zainobros.com
www.greatbrakes.com
<font face="Verdana, Arial" size="2">Originally posted by CodySmurfTA:
dude you need to keep your head up and junk. I still think you should shoot for an F body. Anyway, try to make it, if not, 3 laps is on Sept 29th. Call me sometime dude!
Dont forget about spring break too...</font>
dude you need to keep your head up and junk. I still think you should shoot for an F body. Anyway, try to make it, if not, 3 laps is on Sept 29th. Call me sometime dude!
Dont forget about spring break too...</font>
mike
well, i have a friend riding with me, but I'm sure someone will let you ride shotgun. If not, you guys can argue over who rides shotgun. All I know is that I'd really like to hit 120 easily this time
I do have a digital camera that I'd like to have pics taken with.
I do have a digital camera that I'd like to have pics taken with. sorry laps were cancelled
.. somerthing about them paveing the track and ****
------------------
PMD Power
ICQ 70557275
AIM Curds301 or PMD Power
79 T/A 455 WS6
91 Firebird LO3
Ask me How to Make a Underpowered LO3 Shatter a Flywheel
.. somerthing about them paveing the track and ****------------------
PMD Power
ICQ 70557275
AIM Curds301 or PMD Power
79 T/A 455 WS6
91 Firebird LO3
Ask me How to Make a Underpowered LO3 Shatter a Flywheel
<font face="Verdana, Arial" size="2">Originally posted by PMD Power:
sorry laps were cancelled
.. somerthing about them paveing the track and ****
</font>
sorry laps were cancelled
.. somerthing about them paveing the track and ****</font>
[This message has been edited by Mike86SC (edited September 06, 2001).]
Member
iTrader: (1)
Joined: Sep 1999
Posts: 347
Likes: 0
From: Arlington, TX
Car: 1991 Formula
Engine: 6.2 383 TPIS Miniram
Transmission: T-56
Axle/Gears: Moser 9" 4.11
sh*& i just noticed this and its so hard to get a saturday off :-( is there more of these the ball park isn't but 45 minutes for me :-) just that i work saturday from 9-5:30 :-( really sux plus i dunno if i could show up with the dent in my quarter panel thats been there for 3 years haha no cash to fix :-( anyone have icq here???? 12619770 or e-mail raven_6@hotmail.com i also have msn messanger so just post that e-mail in there i could maybe try to switch my wednesday with my saturday i dunno. doubtfull though. When will the next gathering be, and where???
------------------
1987 Chevrolet Camaro
2.8 Ltr HO Cut air boxes K&N Filters Gutted Cat (Did I say gutted opps don't tell the officer)
Duel catback Exhaust With Flowmaster series 80 dual 5"X24" MONSTER Echos
97 Firebird 16X8" Rims
------------------
1987 Chevrolet Camaro
2.8 Ltr HO Cut air boxes K&N Filters Gutted Cat (Did I say gutted opps don't tell the officer)
Duel catback Exhaust With Flowmaster series 80 dual 5"X24" MONSTER Echos
97 Firebird 16X8" Rims
Man, this sucks. I can't make it, I'm gonna try to do my motor swap that weekend. I'll be at the next one though.
------------------
89 RS parts car
Daily driver 91 RS auto LO3 63k
New project- 89 Formula 350 WS6
383 or 400 to come!
------------------
89 RS parts car
Daily driver 91 RS auto LO3 63k
New project- 89 Formula 350 WS6
383 or 400 to come!
Thread
Thread Starter
Forum
Replies
Last Post




