i need front end help
#1
Junior Member
Thread Starter
Join Date: Sep 2010
Location: Maryland
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Z28
Engine: 305 for now
Transmission: 350
i need front end help
the brackets on the frame rails that the front sway bar bushings bolt to... what are they called???
the one on the drivers side is BROKE, it looks like a eazy repair i just dont know what the part would be called to try and order one. any help please.
thanks
J.P.
the one on the drivers side is BROKE, it looks like a eazy repair i just dont know what the part would be called to try and order one. any help please.
thanks
J.P.
#2
Member
Join Date: Sep 2006
Location: Syracuse, UT
Posts: 170
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Vert Z28
Engine: 305... LS1 waiting to drop in
Transmission: 700-R4... soon 4L60E
Axle/Gears: 3.08 posi nine bolt
Re: i need front end help
Post a picture with your finger touching the part in question!
#4
Junior Member
Thread Starter
Join Date: Sep 2010
Location: Maryland
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Z28
Engine: 305 for now
Transmission: 350
Re: i need front end help
at the end of my finger is were this mount is broken from the frame.
will a wounder bar replace this??
will a wounder bar replace this??
#5
Member
Join Date: Apr 2010
Location: phx,az
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 firebird, 85 transam
Engine: 350 SBC Or 7.07 Tonys,305stock
Transmission: Big Ugly, 700r4
Axle/Gears: 4th gen rear disk 3.42 lsd,9 bolt
Re: i need front end help
Hammer and a welder is all you need bud lol. But the wonder bar will not replace the mount
#6
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,083
Received 1,678 Likes
on
1,274 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: i need front end help
Right: that's not a "replaceable" part.
You have a version of the steering box crack that comes standard on these cars when they get old. SUPER common unfortunately. Standard fix is to weld a little reinforcement plate in behind it, inside the boxed sheet metal. Doesn't take much.
The "wonder bar" will help stiffen that area so it doesn't happen again, but won't fix the existing crack.
You have a version of the steering box crack that comes standard on these cars when they get old. SUPER common unfortunately. Standard fix is to weld a little reinforcement plate in behind it, inside the boxed sheet metal. Doesn't take much.
The "wonder bar" will help stiffen that area so it doesn't happen again, but won't fix the existing crack.
#7
Junior Member
Thread Starter
Join Date: Sep 2010
Location: Maryland
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Z28
Engine: 305 for now
Transmission: 350
Re: i need front end help
Sorry guys, its not the frame thats cracked (belive it or not) its just this bracket (or mount) that bolts to the frame, that the sway bar bushings mount to.
I just got the car a few weeks ago and didnt see it before i bought it. i would weld it but pieces are missing. looks like the kid i bought it from hit a bid @ss pot hole or something
I just got the car a few weeks ago and didnt see it before i bought it. i would weld it but pieces are missing. looks like the kid i bought it from hit a bid @ss pot hole or something
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Sep 2010
Location: Maryland
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Z28
Engine: 305 for now
Transmission: 350
Re: i need front end help
I still need help on this subject.... i belive this mount is call a sway bar mount support (maybe). Can anyone tell me for sure.
#9
Member
Join Date: Apr 2010
Location: phx,az
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 firebird, 85 transam
Engine: 350 SBC Or 7.07 Tonys,305stock
Transmission: Big Ugly, 700r4
Axle/Gears: 4th gen rear disk 3.42 lsd,9 bolt
Re: i need front end help
Check junkyard. For replacement part. And swap it out
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM