New Front Lower A-Frame Bolts
Thread Starter
Joined: Nov 2003
Posts: 266
Likes: 1
From: Mid Mo.
Car: 1989 GTA - Gunmetal grey
Engine: 5.7 ltr.
Transmission: 700R4
Axle/Gears: 3:27 9 Bolt Borg Warner
New Front Lower A-Frame Bolts
Anybody know where one can pick up a set of new front lower a-frame bolts ?
Can't seem to find any on the web. Mine will be destroyed by the time I pull my lower a-frames off to replace the bushings.
Can't seem to find any on the web. Mine will be destroyed by the time I pull my lower a-frames off to replace the bushings.
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: New Front Lower A-Frame Bolts
http://www.spohn.net/shop/1982-1992-...dware-Kit.html
Good luck on the removal. Some, if not all, of the bolts will be frozen to the sleeves--unless you're darned lucky. I'd use a bit of anti-seize on the new bolts.
JamesC
Good luck on the removal. Some, if not all, of the bolts will be frozen to the sleeves--unless you're darned lucky. I'd use a bit of anti-seize on the new bolts.
JamesC
Joined: Aug 2006
Posts: 12,804
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: New Front Lower A-Frame Bolts
they can be replaced with 12mm grade 10.9 bolts, just measure and order, or buy locally, or use Spohns kit. I have a set from UMI that im not using, but they are a bit on the long side.
Joined: Dec 2007
Posts: 1,924
Likes: 12
From: Minnesota
Car: 84 camaro, 88 trans am, 98 camaro
Engine: Modded , stock, LSX modded
Transmission: 700r4, 700r4, t-56
Axle/Gears: 327, 308, 373
Re: New Front Lower A-Frame Bolts
I have a a bunch of stock sets of the nuts and bolts you seek.
Thread Starter
Joined: Nov 2003
Posts: 266
Likes: 1
From: Mid Mo.
Car: 1989 GTA - Gunmetal grey
Engine: 5.7 ltr.
Transmission: 700R4
Axle/Gears: 3:27 9 Bolt Borg Warner
Re: New Front Lower A-Frame Bolts
http://www.spohn.net/shop/1982-1992-...dware-Kit.html
Good luck on the removal. Some, if not all, of the bolts will be frozen to the sleeves--unless you're darned lucky. I'd use a bit of anti-seize on the new bolts.
JamesC
Good luck on the removal. Some, if not all, of the bolts will be frozen to the sleeves--unless you're darned lucky. I'd use a bit of anti-seize on the new bolts.
JamesC
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM
