will i get frome my new motor i have a 88 k 2500 with a tbi 350 in it. in the next week i am swaping in a new lo5 this motor is a crate motor. At this time it is geting a cam, headers, intake, a 670 holley tbi and i all ready have 2.5" duels all the way to the back. what should i look at in terms of # out of this thing.

 

What cam? headers? and intake? w/o those questions answered I say b/w 210-310 hp. Come on be specific about your combo.

 

sorry brain fart. i will be using a set of edelbrock shorties a comp cam extreme energy cam 12-249-4 with .434 lift intake .444 exhaust and 206/212 deg at .05 this is on a 112 lsa it is the the intake is going to be a holley tbi intake. thanks for all the help

 

Probably in the 260-270hp range. The heads are the real limiting factor.

 

ya thats one of the reasons i went with that cam due to the fact it will help where the heads still are able to suport the motor down low. any clues on the torque

 

ttt any one think it will make more than 360 ft/lbs

 

Stock is 300ft/lb so with your mods it should be close to the 360 mark.

 

I agree with the above posted numbers.