Ok, I think I'm going to buy the prom burning equipment very soon now and in reading Traxion's article he states that the type of eprom needed for each car year and model is different. Can someone tell me exactly what eprom or eeprom (if I can use them) I would want to get? My car now is a 91 305 tbi 5 speed and I plan on dropping in my "new" 350 and starting my tuning off of the ANLU bin. Please tell me what I should use.

 

Check here http://www.cruzers.com/~ludis/c3xref.html . The number on your ecm should be 1228746. According to the list you should use a 2732 or 2732a(the "a" is just a different burn and read voltage). I picked mine up my at www.bgmicro.com .

 

Nice, thanks for the link 70RS.

 

Sounds about right. Just modify the eprom so that it knows you've got a stock and not an auto.

 

Jon, about that modification to set the eprom for the manual tranny, I was looking at the ANLU bin file in Winbin using your new ecu file, which settings do I need to change in it for the trans. I think all the settings were just labeled something like "b1" etc. If you could tell me exactly what I need to alter for my trans that'd be great, thanks.

Jim