With the clssifoeds down hope not too many poeple complain, but anyway anyone have a 2brl TBI to 4 bral carb adapter? perferably for 2" butterflies
TIA

 

I got one that I need for just a bit longer, if you can wait. A proJection 2" bore open spacer to squarebore carb manifold... Not a "flat" spacer, but rather open and 1.3" tallish.

EDIT: It spans both the front and the rear of the plenum but the TBI bores are positioned at the front. Call me at work at the 800 number to talk on Monday, 9:30 - 11:00 eastern time.

 

Height wouldn't be an issue but need it right away. Meaning Early next week

 

Only took about an hour to make one using gaskets as templates.

 

What kind of intake will you be putting this on? Spreadbore or square flange? I have the adapter that originaly came off a 454 truck intake, would this be of any help?

Steve

 

For a healthy person probably so, trouble is we're not all that way.
Thanks thou

 

I need mine to bolt up the ProJection TB unit on the Air Gap I have now for a bit of testing/Promming. Doing it tonight, actually, but won't be ready to give it up for a week or two. I'll keep a look out.


What are you building?

 

Originally it's a Q-Jet but that is easy to change.
Going on my Cross Fire. I made a lid for running a Q-Jet on it now switching to a single housing TBI

 

I'd like to see a pix of that modifed x-ram, Grumpy. If ya got one.

 

This guy has got to be good!!!!

 

I have some old pics floating around, but the Q-Jet version was a temporary thing, We're cleaning up the wring some this time around. Looks nice with a coffee table lid on it <g>. Depending on some plenum volume experiments on the *other* car, we might revisit the Xfire, lid.

I do have a line on an Edelbrock Origiinal Smokey ram that is crying for a 383, or 406 to be used on.