do you have part numbers or something? Will I need to change anything else to put this on my car? What kind of differences will I notice? anyone know of a used one somewhere for cheaper?

 

Edelbrock Performer TBI intake - part number EDL-3704 in summit i think. You can check ebay, every once in a while they have new or used intakes. New they are about 200 bucks.

 

I have the Edelbrock Performer TBI Intake Manifold.It's about 1/4" taller than stock,
but still clears the hood with 14x3" Flat Bottom Air Cleaner.Everything bolts up.I had to bend the
fuel lines a little to clear the intake behind the throttle body. Also, the boss is there for the A/C Compressor Support bracket, but it has to be drilled and tapped(in the front, near the thermostat housing).
Bought mine from Summit for $208.
-Rich-

 

Hey Rich, how does yours run in the higher rpms?

 

what kind of differences have you noticed witth it.

 

you will notice that the will pull past 3500 rpm a bit better, if you add a full exhaust to the mix you will fell it pull to about 4500 before you run out of cam. do the ultimate tbi to really notice a difference.

later
tim

 

With a 350 and the Crane Compucam 2030,Ported Turbo City Throttle Body,SLP Headers , 3" Exhaust and Custom Chip,it pulls hard to almost 6000RPM.
-Rich-