Cam question....
Cam question....
I have a mostly stock1985 camaro z28, it has the stock 305 in it and the only real performance mods are a 4x14" k&n and a flowmaster 80 series muffler. I want a cam but i dunno if i can go alot higher with emissions. I want that musle car rumble and was just wondering what was the highest cam i could put in a be Smog legal any ideas? Also summit has 50 state legal cams, would a cam with 208 deg. intake and 214 deg. exhaust w/ .438"Gross intake and .452" gross exhaust give more horsepower than stock or not? If so would itbe alot or? Any ideas guys
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
I picked up the biggest, baddest computer-compatible flat tappet Crane cam they listed in the catalog. I expected it to be a dog off the line and idle high enough to give the Smog ***** a thrill.
It idles at 550 RPM, pulls to 6k in my combo. Comes away from the stop lights with little company (that LS1 4th gen and turbo RX7 have been notible exceptions). I couldn't be happier with it.
Oh, the one you mentioned would also be a substantial improvement over the factory cam.
It idles at 550 RPM, pulls to 6k in my combo. Comes away from the stop lights with little company (that LS1 4th gen and turbo RX7 have been notible exceptions). I couldn't be happier with it.
Oh, the one you mentioned would also be a substantial improvement over the factory cam.
Thread
Thread Starter
Forum
Replies
Last Post





