Can somebody help to identify this cam. It came out of used Iroc, it didn't sound like stock cam.

Thanks,

 

Excuse the size of the photo.
Do you know who made this cam and specs, anybody?

Thanks,

 

I'm too lazy to look it up somewhere, but HR = Hydraulic Roller. I'd run some of the numbers through jegs website.. or maybe comp cams or something, they look familiar.

 

The numbers look like they might be from Crane...

 

The cam is for a small block Chevy 1987 and up because of the stepped nose. It's a Comp Cam. Duration @ .050 is 210/220 .480/.480 lift with 1.5 rockers ,112 lsa 4 degs advance.

www.geocities.com/dzperf

 

Well, heres the rest of the story. All figures are at .050"

Int. centerline = 108*
Exh. centerline = 116*

IO = -3*
IC = 33*

EO = 46*
EC = -6*

Overlap = -9*

Auggie

 

Thanks alot guys for the info.

 

well damn.. now I just need someone to tell me about mine.. I can't find a damn bit of info about it.. I'll see if I can get a picture of it soon.. but it's supposed to be an LT1 cam, but I can't match up any numbers/letters on it.. supposedly out of a 96 Z28..