Brakes and Idle
Your brake power booster uses vacuum to assist the foot pedal. When you apply the brakes, some of the vacuum from the reservoir (large black drum behind the master cylinder) is bled off to assist the braking. The engine vacuum is used to replace the vacuum, so th edrop in vacuum is also experienced by the intake manifold. If the power booster allows too much air or requires too much vacuum, the drop in vacuum will act like a small vacuum leak and raise the idle slightly. It may be normal on a car with a smaller engine, but shouldn't normally occur on a V-8 or larger 6. If it does, it can be a sign of the brake booster failing.
- - - - - - - - - - - - - - - - - -
Later,
Vader
- - - - - - - - - - - - - - - - - -
All my life I've been searching for something. Something never comes - never leads to nothing...
- - - - - - - - - - - - - - - - - -
Later,
Vader
- - - - - - - - - - - - - - - - - -
All my life I've been searching for something. Something never comes - never leads to nothing...
Joined: Sep 2002
Posts: 3,685
Likes: 10
From: PA
Car: 86 Trans AM
Engine: LS1 (not stock...)
Transmission: Built T56
Axle/Gears: Strange 12-bolt w/ 3.73
It may be normal on a car with a smaller engine
Justin
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
Apr 30, 2019 12:14 PM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM









