how good is this setup?
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2001
Posts: 1,638
Likes: 0
From: Greenwood, Indiana
Car: 1984 Trans Am
Engine: Vortec 355
Transmission: TH-700R4
Axle/Gears: GM Axles and GM 3.73
how good is this setup?
SBC 350
-vortec heads
-cam: Specifications:
* Advertised duration: 282 intake/292 exhaust
* Duration at .050 in. cam lift: 224 intake/234 exhaust
* Gross valve lift: .465 in. intake/.488 in. exhaust
* Lobe separation: 114 degrees
* RPM range: 2,200 to 5,700
-performer RPM intake
700R4 stock or 2000stall
3.73 gears
what 1/4 mile would it get me?
would it compare to a LT1 or LS1?
also
im thinking about swapping the cam out for a XE262 or XE268 cam instead
would that be better and if so how much?
thanks
-vortec heads
-cam: Specifications:
* Advertised duration: 282 intake/292 exhaust
* Duration at .050 in. cam lift: 224 intake/234 exhaust
* Gross valve lift: .465 in. intake/.488 in. exhaust
* Lobe separation: 114 degrees
* RPM range: 2,200 to 5,700
-performer RPM intake
700R4 stock or 2000stall
3.73 gears
what 1/4 mile would it get me?
would it compare to a LT1 or LS1?
also
im thinking about swapping the cam out for a XE262 or XE268 cam instead
would that be better and if so how much?
thanks
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM
Street Lethal
Engine/Drivetrain/Suspension Parts for Sale
3
Aug 13, 2015 08:28 PM
