Ok, i need some help here. I need someone out there to put a picture of the torque converter lockup switch that plugs into the 700-R4 transmission. I need a wiring diagram along with an actual photo of the plug with the 3 prongs on it that plugs directly into the transmission. So really, i need someone out there to get under their car, take the plug out, and take a picture of it and post it on here so i can print it out. Me and a friend are going to make our own plug for the tranny since no junkyards around here have the wire. Any help would be greatly appreciated.

 

can anyone please help me??

 

Sorry, the only help I can give is putting this back up top. Good luck man.

 

I got the plug with pigtail wire attachments from PartsPlus store and I know NAPA has/can get them. 8-14 bucks... That's the male 4-prong plug that will plug-in to the female 4-prong plug on the tranny, right?

If your tranny is missing it's female plug, you should be able to buy a matched set of plugs at said store(s) and rig something up.

[This message has been edited by FastBroker (edited October 07, 2000).]