What cam?
Thread Starter
Junior Member
iTrader: (1)
Joined: Oct 2003
Posts: 21
Likes: 0
From: Wichita, Kansas
Car: 1992 Camaro RS
Engine: 305 (406 swap coming)
Transmission: 700R4
What cam?
I am working on a 1987 Iroc 305 tpi with a 5 speed. can anyone tell me what the stock cam numbers are for this car?
Supreme Member
Joined: Sep 1999
Posts: 7,072
Likes: 13
From: Philly, PA
Check out the FAQs and tech segments of this board. They have cam specs listed for various factory f-body applications.
If memory serves it's around 201/207 duration @ .050 and around .410-.420 lift. That's the "aggressive" TPI cam that 5-speed 305 TPIs and all 350 TPIs got. Stock 305 TPIs that were paired with an automatic trans often got what is referred to affectionately as the "peanut cam" with even milder specs.
If memory serves it's around 201/207 duration @ .050 and around .410-.420 lift. That's the "aggressive" TPI cam that 5-speed 305 TPIs and all 350 TPIs got. Stock 305 TPIs that were paired with an automatic trans often got what is referred to affectionately as the "peanut cam" with even milder specs.
Supreme Member
Joined: Apr 2001
Posts: 4,969
Likes: 0
From: USA
Car: yy wife, crazy.
Engine: 350, Vortecs, 650DP
Transmission: TH-350
Axle/Gears: 8.5", 3.42
The blind leading the blind again. 
Just messing Damon.
It's actually under the Tech Data, near the bottom of the page.
https://www.thirdgen.org/newdesign/tech/techdb.shtml
305 5spd / 350 AT (LB9/ L98) .....
GM part #14093643*
Lift --- .404" Int/ .415" Exh.
Duration @ .050" 202* Int/ 207* Exh.
Lobe Seperation... 114.5*
Just messing Damon.
It's actually under the Tech Data, near the bottom of the page.
https://www.thirdgen.org/newdesign/tech/techdb.shtml
305 5spd / 350 AT (LB9/ L98) .....
GM part #14093643*
Lift --- .404" Int/ .415" Exh.
Duration @ .050" 202* Int/ 207* Exh.
Lobe Seperation... 114.5*
Thread
Thread Starter
Forum
Replies
Last Post
