When taking the studs off of the exhaust manifold the stud breask off? What other types of problems may I encounter? Or is this an easy mod(Headers)?

------------------
89 camaro 305 tbi, flomaster 3 chamber cat back, gutted cat, Edlebrock open element, 2 kicker comp 12"'s, polk for the rest. Phoenix gold xs2300 to subs, kicker impulse 404XI to 4 speakers, pioneer DEH- P7000R head unit, and finally a 12 disc changer. Full leather interior from MrMikes.com

 

No problems just a bunch of cuts. You might have to jack the engine up on the driver's side to wedge the header in.

------------------
1986 CAMARO Z28 -> 151,000 original miles, 43,000 on 89' vette 350 block, Holley 650 DP, Weiand intake, 1.6 rockers, 1 5/8" headers, no cat, 2 1/2" Flowmaster catback, Mallory coil, March pulleys, T5 with 3.35 1st gear, 90% Centerforce clutch, 3.73 posi, Eibach 1" drop springs, Spohn LCA's, Spohn adjustable panhard rod, Subframes connectors, polyurethane swaybar bushings/endlinks, 2 12" Sound Streams, 2 Infinity 6X9's, 2 Pioneer 6X9's, 800 watt Lanzar Vibe amp. ET 13.22@ 106.4MPH Next mods-> Homemade ram air, B&M shifter, Extreme Energy 230/236 cam, Holley Street Dom intake.

 

well its entirely possible you might run into prob with theexhaust manifold bolts breaking, but its always a crap shoot with anything that has been threaded in for years on end

Steve

 

Try putting on the passenger side from the bottom. Also, I might be wrong but I think that I took the starter off. Make sure that you jack the car up really high for clearance. Use jack stands