Which cam to go with?
Thread Starter
Member
Joined: Dec 2003
Posts: 393
Likes: 0
From: Iowa
Car: 94 Camaro
Engine: 380 sbc
Transmission: th400
Axle/Gears: 9" 4.11
Which cam to go with?
Ok, I've narrowed down my cam choices to two.
214/224@.50 .442/.465 112LSA
-or-
224/224@.50 .465/.465 114LSA
This is going on a 355 with stock 76cc heads on it. I'll have open long tubes, performer intake, 600 or 650 cfm carb, with a higher stall converter in the th350 at a later date. I'll have 3.23 gears out back with a possibility of going to 3.73's. Nearly all of my racing will be on an 1/8 mile drag strip.
I just want the one that will give the most power, I dont care about idle, gas milage, or anything like that.
Thanks for any help you can give me.
214/224@.50 .442/.465 112LSA
-or-
224/224@.50 .465/.465 114LSA
This is going on a 355 with stock 76cc heads on it. I'll have open long tubes, performer intake, 600 or 650 cfm carb, with a higher stall converter in the th350 at a later date. I'll have 3.23 gears out back with a possibility of going to 3.73's. Nearly all of my racing will be on an 1/8 mile drag strip.
I just want the one that will give the most power, I dont care about idle, gas milage, or anything like that.
Thanks for any help you can give me.
Thread
Thread Starter
Forum
Replies
Last Post