Will this fit on a G1 SBC?
Member
iTrader: (1)
Joined: Feb 2001
Posts: 396
Likes: 0
From: kentucky
Car: 1990 GTA
Engine: L98
Transmission: manual/t56
There is no thermostat housing but the bolt pattern in the first pic looks like the standard sbc pattern. There doesn't seem to be room for a distributor either.
Supreme Member
iTrader: (2)
Joined: Jan 2002
Posts: 9,962
Likes: 5
From: Moorestown, NJ
Car: 88 Camaro SC
Engine: SFI'd 350
Transmission: TKO 500
Axle/Gears: 9-bolt w/ 3.23's
With some modifications it might fit but why bother? Your present intake is fine unless your going to get really crazy with your setup.
Senior Member
Joined: Mar 2002
Posts: 857
Likes: 1
From: Phoenix, AZ
Car: '82 Z28
Engine: 350HO
Transmission: M4
in a word
NO.
thats an LT1 intake, it goes on an GENII SBC not a GENI
and its $2800!!!!!!!!!!!!!!!
dude, my whole engine didn't even cost that much, and it should run high 12's.
do you like wasting money?
NO.
thats an LT1 intake, it goes on an GENII SBC not a GENI
and its $2800!!!!!!!!!!!!!!!
dude, my whole engine didn't even cost that much, and it should run high 12's.
do you like wasting money?
Supreme Member
Joined: Jul 2001
Posts: 3,974
Likes: 0
From: Pueblo Co
Car: 1989 C4
Engine: L98
Transmission: 700r4
Axle/Gears: 307
Why, did Holley run out of stealth rams or somthing?
Anything could be made to fit and work but unless you have your very own printing press and plates its not worth it.
Anything could be made to fit and work but unless you have your very own printing press and plates its not worth it.
Supreme Member
Joined: Apr 2002
Posts: 1,083
Likes: 0
From: HAUNTING THE CHAPEL
Car: '87 Mustang LX
Engine: 5.0
Transmission: T-5
Originally posted by scottland
do you like wasting money?
do you like wasting money?
Trending Topics
Supreme Member
Joined: Jun 2001
Posts: 3,238
Likes: 4
From: Calgary, Alberta, Republic of Western Canada
Car: 1986 Sport Coupé
Engine: 305-4v
Transmission: 700R4 and TransGo2
That is not an original LT1 intake. The real originals are compatible with gen 1 small blocks after a few mods.
Look up John Millican in the search function. He pioneered the procedure and will custom make one for you, if you like. His website also shows you how to do it yourself.
Look up John Millican in the search function. He pioneered the procedure and will custom make one for you, if you like. His website also shows you how to do it yourself.
Senior Member
Joined: Mar 2002
Posts: 857
Likes: 1
From: Phoenix, AZ
Car: '82 Z28
Engine: 350HO
Transmission: M4
that lt1 would bolt up, but there wouldn't be install a distributer.
and there still is absolutley no point to buyng an intake that overpriced.
the stealth ram would perform damn near as good, and it costs 5 times less. hell even the TPIS miniram is only about $1000, and it is way overpriced.
if your looking for a trick fuel injection setup, buy a single plane intake, and drill it, and weld in injetor bosses. or buy the edelbrock victor Efi intake(victor with injector bosses cast in)
get some fuel rails, and a nice dry 4-barrel throttle body, like an accufab, holley or accel TB.
would perform awsome and be different, and only cost about $900 3 times less than that LT1 intake that you posted.
and there still is absolutley no point to buyng an intake that overpriced.
the stealth ram would perform damn near as good, and it costs 5 times less. hell even the TPIS miniram is only about $1000, and it is way overpriced.
if your looking for a trick fuel injection setup, buy a single plane intake, and drill it, and weld in injetor bosses. or buy the edelbrock victor Efi intake(victor with injector bosses cast in)
get some fuel rails, and a nice dry 4-barrel throttle body, like an accufab, holley or accel TB.
would perform awsome and be different, and only cost about $900 3 times less than that LT1 intake that you posted.
Supreme Member
Joined: Apr 2003
Posts: 3,563
Likes: 1
Car: 1991 RS Camaro (Jet Black)
Engine: 95 383 CI (6.3) LT1
Transmission: 95 T-56
Originally posted by scottland
in a word
NO.
thats an LT1 intake, it goes on an GENII SBC not a GENI
and its $2800!!!!!!!!!!!!!!!
dude, my whole engine didn't even cost that much, and it should run high 12's.
do you like wasting money?
in a word
NO.
thats an LT1 intake, it goes on an GENII SBC not a GENI
and its $2800!!!!!!!!!!!!!!!
dude, my whole engine didn't even cost that much, and it should run high 12's.
do you like wasting money?
Member
Joined: Nov 2002
Posts: 256
Likes: 0
From: Kenner, La
Car: '86 iroc
Engine: lb9 305
Transmission: 700r4
Originally posted by SOLID LIFTER
No he just likes to waste peoples time by acting like he's going to buy or do something to his car and not really buy or do anything to it.
No he just likes to waste peoples time by acting like he's going to buy or do something to his car and not really buy or do anything to it.
Give him a break when its due.
Thread Starter
Banned
Joined: Jun 2003
Posts: 2,795
Likes: 0
From: Jax, Florida
Car: 1986 Trans Am
Engine: 305 LB9 TPI
Transmission: 700-R4
i am asking for another local thirdgener guys. NOt for me. That thing is way too damn expensive, it looks ugly but he says its looks awesome.
TGO Supporter
Joined: Aug 1999
Posts: 14,811
Likes: 1
From: Jackson County
Originally posted by scottland
in a word
NO.
thats an LT1 intake, it goes on an GENII SBC not a GENI
and its $2800!!!!!!!!!!!!!!!
dude, my whole engine didn't even cost that much, and it should run high 12's.
do you like wasting money?
in a word
NO.
thats an LT1 intake, it goes on an GENII SBC not a GENI
and its $2800!!!!!!!!!!!!!!!
dude, my whole engine didn't even cost that much, and it should run high 12's.
do you like wasting money?
Senior Member
Joined: Feb 2002
Posts: 698
Likes: 0
From: Oregon
Car: 1982 T/A -1986 Z28
Engine: 383 -305
Transmission: T56-700r
Originally posted by scottland
in a word
NO.
thats an LT1 intake, it goes on an GENII SBC not a GENI
and its $2800!!!!!!!!!!!!!!!
dude, my whole engine didn't even cost that much, and it should run high 12's.
do you like wasting money?
in a word
NO.
thats an LT1 intake, it goes on an GENII SBC not a GENI
and its $2800!!!!!!!!!!!!!!!
dude, my whole engine didn't even cost that much, and it should run high 12's.
do you like wasting money?
lmao,shoulda read the rest of the post...haha
Thread
Thread Starter
Forum
Replies
Last Post
gixxer92
Engine Swap
33
Apr 12, 2022 12:09 AM
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
9
May 18, 2017 11:20 AM
[GA] Shorty headers
Night rider327
Engine/Drivetrain/Suspension Parts for Sale
0
Sep 16, 2015 02:20 AM
