Vibration Damper Removal?
Thread Starter
Junior Member
Joined: Feb 2001
Posts: 54
Likes: 0
From: Berlin, CT, USA
Vibration Damper Removal?
I'm working on a 350, and it's time to get the Damper off, but i don't have a Bolt Grip Puller. I already tried giving the damper a tap or two with a hammer, but it won't budge. Is there another way to get the damper off?
Thanks
Thanks
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
DON'T HIT IT WITH A HAMMER under any circumstances!!! You will destroy the blob of spooge that holds it together and risk having the outer ring fly off at high RPMs.
Go to AutoZone or some one of the other chain stores like that and "rent" a balancer pulle/installer. They're free, and don't damage anything.
------------------
"So many Mustangs, so little time..."
ICON Motorsports
Go to AutoZone or some one of the other chain stores like that and "rent" a balancer pulle/installer. They're free, and don't damage anything.
------------------
"So many Mustangs, so little time..."
ICON Motorsports
Thread
Thread Starter
Forum
Replies
Last Post
