Cam combo??
Thread Starter
Supreme Member
Joined: Sep 1999
Posts: 1,383
Likes: 0
From: Oakville, Ct
Car: 1991Firebird T/A
Engine: 350
Transmission: Modified Viper t-56
Axle/Gears: dana 44, 3.55
Cam combo??
ok, got a 305, 9:1 compression, stock heads, edlebrock airgap intake, 1 5/8 tes headers, and a holley 670 carb-
anyone run a similiar combo? what kinda cam ya got, and hp numbers?? (or et's)
ported heads make a bigger difference? just looking for suggestions, gonna be doing the cam swap soon, and i am looking for some advice, possible from experiance ona good cam to get.
Steve
anyone run a similiar combo? what kinda cam ya got, and hp numbers?? (or et's)
ported heads make a bigger difference? just looking for suggestions, gonna be doing the cam swap soon, and i am looking for some advice, possible from experiance ona good cam to get.
Steve
Senior Member
Joined: Jul 1999
Posts: 900
Likes: 1
From: Haslett, MI
Car: 1984 Trans Am WS6
Engine: Minirammed 385, 396 RWHP
Transmission: T56
Axle/Gears: 3.73 Moser 12-bolt
Yup. I do, except its a 9.5:1 compression engine.
See the SIG below.
You'll want a torque converter and you'll want to port the heads. I suggest the $150 converter from Turbine Technologies.
------------------
Daniel Burk
View my third-gen hobbyist performance page!
View my reader's ride!
'84 Trans Am WS6/L69
KB SFC, Moser axles, Torsen Diff., Spohn Adj. torque arm,
Ported 305 heads w/1.94"intake valves, Comp Cams XE262H, Griffen alum. radiator,
Turbine Technologies 2500 stall converter, underdrive pulleys, Crane Hi-6 & more.
1.05g skidpad verified.
Best of 14.039 at 100.82 MPH in Stanton, MI
New!Full 1LE brake upgrade! Details at website above.
See the SIG below.
You'll want a torque converter and you'll want to port the heads. I suggest the $150 converter from Turbine Technologies.
------------------
Daniel Burk
View my third-gen hobbyist performance page!
View my reader's ride!
'84 Trans Am WS6/L69
KB SFC, Moser axles, Torsen Diff., Spohn Adj. torque arm,
Ported 305 heads w/1.94"intake valves, Comp Cams XE262H, Griffen alum. radiator,
Turbine Technologies 2500 stall converter, underdrive pulleys, Crane Hi-6 & more.
1.05g skidpad verified.
Best of 14.039 at 100.82 MPH in Stanton, MI
New!Full 1LE brake upgrade! Details at website above.
Thread
Thread Starter
Forum
Replies
Last Post
