What do you think of this combo?
Thread Starter
Senior Member
Joined: Mar 2002
Posts: 755
Likes: 0
From: Newport News, Va
Car: 84 Z28
Engine: GMPP 350 HO
Transmission: 700R4 + Shift Kit
Axle/Gears: Auburn Posi; Richmond 3:73 Gears
What do you think of this combo?
My car is a daily driver, so keep that in mind.
Pro Topline 58cc Vortec heads - For 305 motors
Edelbrock RPM Manifold
Lunati Voodoo Cam 262/268 - 219/227 @ 050
Harland Sharp 1.5 Roller Rockers
Coyle’s True Roller timing Chain
Engine analyzer says I should be right around 300hp with a Stock CR of 8.6. I already have headers, full exhaust and a 650 Speed Demon VE carburetor. Would this combo be good on the street? The cam says power rang is from 1400-5700 and in engine analyzer it was still pulling strong past 6000rpm but I will not be revving the engine that high on a daily driver. Also would this be a good setup to transfer to a 350 later down the road?
Pro Topline 58cc Vortec heads - For 305 motors
Edelbrock RPM Manifold
Lunati Voodoo Cam 262/268 - 219/227 @ 050
Harland Sharp 1.5 Roller Rockers
Coyle’s True Roller timing Chain
Engine analyzer says I should be right around 300hp with a Stock CR of 8.6. I already have headers, full exhaust and a 650 Speed Demon VE carburetor. Would this combo be good on the street? The cam says power rang is from 1400-5700 and in engine analyzer it was still pulling strong past 6000rpm but I will not be revving the engine that high on a daily driver. Also would this be a good setup to transfer to a 350 later down the road?
Thread Starter
Senior Member
Joined: Mar 2002
Posts: 755
Likes: 0
From: Newport News, Va
Car: 84 Z28
Engine: GMPP 350 HO
Transmission: 700R4 + Shift Kit
Axle/Gears: Auburn Posi; Richmond 3:73 Gears
Wow so many views so little replies. Does anyone at least know someone who has used one of the Voodoo Cams are they any good or am I better off looking to Comp Cams? Also will the cam I choose above produce sufficient vacuum for all accessories?
Senior Member
iTrader: (1)
Joined: Jan 2004
Posts: 936
Likes: 0
From: UofA(Tucson), AZ
Car: 92 Precision Red Firebird
Engine: v6->357 vortec xe262h rpm intake
Transmission: t5-> t56
Axle/Gears: 10bolt 3.42s
ive heard voodoo cams are pretty good. power wise i dont know...300hp?
Thread
Thread Starter
Forum
Replies
Last Post
roysatikas
Transmissions and Drivetrain
0
Sep 22, 2015 08:15 PM