Car wants to stall in drive.
Thread Starter
Junior Member
Joined: Oct 2002
Posts: 77
Likes: 0
Car: 86 Z28
Engine: 383
Transmission: built 700r4
Car wants to stall in drive.
So I put a carbed 383 in my car. Now when I have it in park and running it runs like a champ but when I put it in drive or reverse it can't hold idle and stalls.
It drives fine otherwise.
What do you think?
It drives fine otherwise.
What do you think?
Member
iTrader: (2)
Joined: Jan 2005
Posts: 475
Likes: 0
From: Texas
Car: 1991 RS Camaro Convertible
Engine: 305
Transmission: 700R4
Re: Car wants to stall in drive.
Originally posted by CamZ28
So I put a carbed 383 in my car. Now when I have it in park and running it runs like a champ but when I put it in drive or reverse it can't hold idle and stalls.
It drives fine otherwise.
What do you think?
So I put a carbed 383 in my car. Now when I have it in park and running it runs like a champ but when I put it in drive or reverse it can't hold idle and stalls.
It drives fine otherwise.
What do you think?
I have exactly the same problem with a TBI RS. Let me know if you find an answer.
Thanks,
Alex
Supreme Member
Joined: Jul 2001
Posts: 3,931
Likes: 0
From: Palm Bay, Florida, USA
Car: 95 E-150 & 07 Kawasaki ZX-6R
Engine: A slow one & a fast one
Transmission: A bad one & a good one
Axle/Gears: A weak one & a chained one
Have you checked the basics? Idle speed, ignition timing, fuel pressure.... Check your spark too, see how strong it is. White = good. Blue = average. Orange, red, yellow, etc = Poor.
Thread
Thread Starter
Forum
Replies
Last Post
