New coil screwed my car
New coil screwed my car
Ok so check it out i switched my stock coil for an Accel performance coil part#140011
it runs fine up to about 35mph but after that or if i gun it it starts feeling like its starved for fuel and then starts backfirering and engine gets really hot, so i switched the coil out with another accel coil and it still did it, put stock coil back in now its running normal. pls help
------------------
92rs
new 305TBI cratemotor
K&N
Helix power tower(tbi spacer)
flowmasters
no cat(piped over)
street&performance elec. chip
open element air cleaner
removed hood seals.
"I live life a quarter mile at a time eatin fords and ****tin ricers"
it runs fine up to about 35mph but after that or if i gun it it starts feeling like its starved for fuel and then starts backfirering and engine gets really hot, so i switched the coil out with another accel coil and it still did it, put stock coil back in now its running normal. pls help
------------------
92rs
new 305TBI cratemotor
K&N
Helix power tower(tbi spacer)
flowmasters
no cat(piped over)
street&performance elec. chip
open element air cleaner
removed hood seals.
"I live life a quarter mile at a time eatin fords and ****tin ricers"
no its not possible to wire it backwards the clips will only go on one way
------------------
92rs
new 305TBI cratemotor
K&N
Helix power tower(tbi spacer)
flowmasters
no cat(piped over)
street&performance elec. chip
open element air cleaner
removed hood seals
taylor pro ignition wires
removed AIR equipment
"I live life a quarter mile at a time eatin fords and ****tin rice"
------------------
92rs
new 305TBI cratemotor
K&N
Helix power tower(tbi spacer)
flowmasters
no cat(piped over)
street&performance elec. chip
open element air cleaner
removed hood seals
taylor pro ignition wires
removed AIR equipment
"I live life a quarter mile at a time eatin fords and ****tin rice"
Supreme Member
Joined: Sep 2001
Posts: 6,111
Likes: 53
From: Ontario, Canada
Car: 1988 Firebird S/E
Engine: 406Ci Vortec SBC
Transmission: TH-350/3500stall
Axle/Gears: 7.5" Auburn 4.10 Posi-Traction
That coil looks like a capactive discharge type coil. Your stock system is inductive discharge type.
[This message has been edited by F-BIRD'88 (edited November 16, 2001).]
[This message has been edited by F-BIRD'88 (edited November 16, 2001).]
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
Dec 2, 2016 06:33 PM





