could these heads be used for a 400bhp build up?
Thread Starter
Member
Joined: Apr 2005
Posts: 350
Likes: 0
From: england, UK
Car: '87 iroc camaro
Engine: 350 L98
Transmission: 700-R4
Axle/Gears: 3.27 posi
could these heads be used for a 400bhp build up?
Live in the U.K and these heads have just popped up on ebay.
http://cgi.ebay.co.uk/CHEVY-CHEVROLE...QQcmdZViewItem
Would these be good enough for a performance build up. I'm looking to get around 400bhp with a CR of around 10 .1.
Thx guys
http://cgi.ebay.co.uk/CHEVY-CHEVROLE...QQcmdZViewItem
Would these be good enough for a performance build up. I'm looking to get around 400bhp with a CR of around 10 .1.
Thx guys
Joined: Sep 2005
Posts: 28,031
Likes: 2,500
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
No, unfortunately....
They will not have the bolt holes in the ends, needed for installing little things like.... an alternator.
They're not 350 heads, or even 327 heads. They're actually 283 heads, from after when the 327 came out; when the 283 had been "demoted" to the economy 2-barrel model, compared to the "premium performance" 327 (usually a 4-barrel in those years). http://www.mortec.com/castnum.htm
Not the right thing at all.
They will not have the bolt holes in the ends, needed for installing little things like.... an alternator.
They're not 350 heads, or even 327 heads. They're actually 283 heads, from after when the 327 came out; when the 283 had been "demoted" to the economy 2-barrel model, compared to the "premium performance" 327 (usually a 4-barrel in those years). http://www.mortec.com/castnum.htm
Not the right thing at all.
Thread
Thread Starter
Forum
Replies
Last Post