Need your camaro knowledge!!
Banned
Joined: Sep 2000
Posts: 1,940
Likes: 2
From: Glendale, AZ
Car: 4 Mopars total
Engine: Pentastar power
Transmission: T/F and New Process
Axle/Gears: Three 8 3/4's & one 9 1/4
You have got to be kidding me! How many times must this question be asked on this site? Search, look around, something! This info is ALL OVER this website.
Supreme Member
iTrader: (1)
Joined: Jul 2004
Posts: 10,763
Likes: 4
From: Calgary, AB, Canada
Car: 1982 Trans-Am
Engine: 355 w/ ported 416s
Transmission: T10, hurst shifter
Axle/Gears: 10 bolt, true-trac, 3.73
in order to answer the next question, the only 350 available in the 3rd gens was the TPI motor, so only 87-92.
** 1982-1986 Fbodies did not, could not, come from the factory with a 350** aside from a handful in 1986, the transition year, but they're super rare
So a 350 in a 1982-1985 Fbody was put there after it left the factory, it's extremely common though, so don't be surprised to see it.
** 1982-1986 Fbodies did not, could not, come from the factory with a 350** aside from a handful in 1986, the transition year, but they're super rare
So a 350 in a 1982-1985 Fbody was put there after it left the factory, it's extremely common though, so don't be surprised to see it.
Banned
Joined: Sep 2000
Posts: 1,940
Likes: 2
From: Glendale, AZ
Car: 4 Mopars total
Engine: Pentastar power
Transmission: T/F and New Process
Axle/Gears: Three 8 3/4's & one 9 1/4
The only 1986 F-bodies with a 350 were some 50 or so assembled by GM for testing purposes. None ever made it to the public. If anyone says they did....prove it.
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
2) Because you only have a couple of posts, you may be unaware of the site's search function, a function which will provide a ton of info from some very knowledgeable folks.
JamesC
Joined: Nov 2005
Posts: 1,946
Likes: 0
From: Sacramento
Car: 91 RS
Engine: 350 TBI
Transmission: WC T5
Axle/Gears: 3.42 Posi
I want to chime in and say that if we start answering posts like this, then all people will get when they search is a bunch of posts telling people to search. I know when I search I get a lot of this, so, as long is it doesnt get severely out of hand we need to just ANSWER THE QUESTION FIRST, THEN maybe inform about the search and how useful it is, and go about our business.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post








