383 stroker bottom end, 4 bolt block, 2 peice RMS...Gonna be using Hooker LT's and eventually a tubular K-member, dont want anything crazy just for street/strip use but want to keep clearance in mind. Anyway, best pan/pump/pickup for this application, hopefully not more than a couple hundred bucks.

Thanks

 

I've always used stock pans on my 383s. They'll clear.

The stock pump and pick is hard to beat as long as you keep the pickup close to the bottom of the pan (1/4") and weld the pickup in place so it can't fall out.

 

I have the 6 quart moroso pan they make for our cars...I have one of there pumps and pick ups has well... Its theyre high volume high,high pressure pump..I have 80 lbs of pressure, but if I remember, the oil pan was 110, and the pump was around 90...