ok so now i got me a cam
Thread Starter
Supreme Member
iTrader: (8)
Joined: Dec 2004
Posts: 1,153
Likes: 0
From: kissimmee fl
Car: 88 iroc-z z-28
Engine: 383
Transmission: th400
Axle/Gears: 3.42
ok so now i got me a cam
alrite i bought a cam for the 305 and i was wonderin if i need to do headwork to my head b4 i can install the cam or not. heres the link to the cam. http://store.summitracing.com/partde...5&autoview=sku and here is my heads casting number 14014416
Supreme Member
Joined: Aug 2005
Posts: 3,004
Likes: 4
From: Yellowknife, NWT, Canada
Car: 84 Z28
Engine: 357
Transmission: TH-350C
Axle/Gears: 3.43
Im running a set of 416s myself with a comp XE268 .477/.488 lift (@ valve) without having to cut the valve guides.
I would highly suggest ditching the stock springs for some matched to the cam though.
Also due to casting variances you should double check every valve for clearance once its all together. Even on the same head some can have tons of room and others will be tight! Who knows, even with your lift you might have a couple valves hitting the guides...
I would highly suggest ditching the stock springs for some matched to the cam though.
Also due to casting variances you should double check every valve for clearance once its all together. Even on the same head some can have tons of room and others will be tight! Who knows, even with your lift you might have a couple valves hitting the guides...
Thread
Thread Starter
Forum
Replies
Last Post