Third Generation F-Body Message Boards

Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Pushrods for a 305?

   
Old Feb 23, 2007 | 02:22 PM
Share
  #1  
Bane's Avatar
Bane
Thread Starter
Member
 
Joined: Apr 2006
Posts: 105
Likes: 0
Pushrods for a 305?
I've got an 86 lg4 305. We're gonna be putting on a performer rpm qjet intake, a comp cams xe262h cam, and re-working the heads. What are the best pushrods for this set up?
Reply
0
Old Feb 23, 2007 | 03:10 PM
Share
  #2  
sofakingdom's Avatar
sofakingdom
Supreme Member
20 Year Member
Community Builder
iTrader: (1)
 
Joined: Sep 2005
Posts: 27,862
Likes: 2,427
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
The standard ones that Comp recommends; I forget the part #. You can look them up in their catalog on the Net. They'll be 7.890" or 7.900" long, depending on whether you go with the normal ones or the "premium" choice.
Reply
0
Old Feb 24, 2007 | 12:39 AM
Share
  #3  
Kevin91Z's Avatar
Kevin91Z
Moderator
25 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
I recommend Manley pushrods, since I work for them.

http://www.manleyperformance.com/
Reply
0
Old Feb 24, 2007 | 09:32 AM
Share
  #4  
Randy82WS7's Avatar
Randy82WS7
Supreme Member
 
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
stock length hardened ones such as summit racing ones would be fine and are inexpensive

imho

good luck
Reply
0
Old Feb 25, 2007 | 12:49 PM
Share
  #5  
Sonix's Avatar
Sonix
Supreme Member
iTrader: (1)
 
Joined: Jul 2004
Posts: 10,763
Likes: 4
From: Calgary, AB, Canada
Car: 1982 Trans-Am
Engine: 355 w/ ported 416s
Transmission: T10, hurst shifter
Axle/Gears: 10 bolt, true-trac, 3.73
I re-used my old ones...
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
700R4 Issue
GouldyGTR
Transmissions and Drivetrain
5
Sep 7, 2015 09:05 PM
New here, with a question
Stryker412
Tech / General Engine
17
Sep 7, 2015 09:11 AM
Fuel pouring out of my charcoal line
TBRays98
Tech / General Engine
6
Sep 6, 2015 05:05 PM
Previous Engine Swap = Current Starter Issues
Formula_88AE
Engine Swap
1
Sep 3, 2015 01:47 PM
O2 sensor question
willyjoejr
Exhaust
2
Sep 3, 2015 09:26 AM
Tags
Back to Subforum
Tech / General Engine
View Next Unread
STARTING PROBLEM


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 08:32 AM.