EGR solenoid replacement
Thread Starter
Supreme Member
Joined: Dec 2004
Posts: 1,204
Likes: 0
From: chicago IL
Car: 91 formula
Engine: 350 tuned port. bolt ons
Transmission: 700r4
Axle/Gears: 3.73
EGR solenoid replacement
I have an 350 TPI. I have a broken wire coming from the egr solenoid to the egr valve. I need to replace the egr solenoid and am wondering if I need to take the plenum off or can i seek the wire under it. Does anyone know how to take off the egr solenoid.
Joined: Nov 2006
Posts: 1,698
Likes: 0
From: Connecticut
Car: 1987 Camaro, 1986 Trans AM
Engine: V6 2.8 multi-port and V8 5.0 FI
Transmission: 5-Speed and Automatic
Axle/Gears: no idea
Re: EGR solenoid replacement
yes the actual EGR is under the plenum. The EGR solenoid i would buy from the dealer you need a specific one and after market never matched my car.
also the solenoid is being held down by one bolt. remove the hose lines to it and you should see it.
i did this on my 1986 305
hopefully they are similar in part locations
goodluck
also the solenoid is being held down by one bolt. remove the hose lines to it and you should see it.
i did this on my 1986 305
hopefully they are similar in part locations
goodluck
Thread
Thread Starter
Forum
Replies
Last Post
mdtoren
Tech / General Engine
0
Aug 16, 2015 05:45 PM
