power steering problem
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 595
Likes: 0
From: IA
Car: 1984 z28 camaro / 2019 accord sport
Engine: 350
Transmission: 700r4
Axle/Gears: 3.42
power steering problem
i need to know where to buy the high side line that goes from a type two pump to the box it only needs to be like a foot long
these are the fittings i need
these are the fittings i need
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 595
Likes: 0
From: IA
Car: 1984 z28 camaro / 2019 accord sport
Engine: 350
Transmission: 700r4
Axle/Gears: 3.42
Re: power steering problem
it is not a stock pump and it is not in the stock location
the bigger one that goes in the box is an 18 mm i got that from searching
the smaller one is a 5/8 wrench size
the bigger one that goes in the box is an 18 mm i got that from searching
the smaller one is a 5/8 wrench size
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: power steering problem
Try the yellow pages under "Hydraulics" then to get a custom hose made.
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 595
Likes: 0
From: IA
Car: 1984 z28 camaro / 2019 accord sport
Engine: 350
Transmission: 700r4
Axle/Gears: 3.42
Re: power steering problem
i called all the places in town no one can make a hose with o ring fittings on the ends but i think i may have found the solution
for the box
http://www.performancebodies.com/sto...pf%5Fid=101230
for the pump because 16 mm and 5/8 are almost the same size
http://www.performancebodies.com/sto...pf%5Fid=101220
for the box
http://www.performancebodies.com/sto...pf%5Fid=101230
for the pump because 16 mm and 5/8 are almost the same size
http://www.performancebodies.com/sto...pf%5Fid=101220
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: power steering problem
They're called "Saginaw" fittings... Earl's makes adapters to use AN fittings with them.
Senior Member
Joined: Jan 2007
Posts: 382
Likes: 0
From: Illinois
Car: 89 Firebird
Engine: 350 Ramjet
Transmission: 700R4
Axle/Gears: GM 9 bolt 3:27
Re: power steering problem
Russel's and earls both make adapters for that fitting to AN fittings.
then have a regular AN hose made to fit.
This is similar to what you need.
http://store.summitracing.com/partde...5&autoview=sku
You all beat me to it.
then have a regular AN hose made to fit.
This is similar to what you need.
http://store.summitracing.com/partde...5&autoview=sku
You all beat me to it.
Trending Topics
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 595
Likes: 0
From: IA
Car: 1984 z28 camaro / 2019 accord sport
Engine: 350
Transmission: 700r4
Axle/Gears: 3.42
Re: power steering problem
is the o ring needed on the pump side or can i use this
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: power steering problem
That fitting is an inverted flare. It's a different beast entirely. You need the O ring.
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
Mar 8, 2019 12:21 PM
backtothe80s
Suspension and Chassis
33
Sep 5, 2015 12:39 AM
