I am looking to rebuild my engine soon and have been doing some research around the net seeing what other people have built and the numbers they are producing. Here is a list of parts that I am thinking of going with.
Engine Build Sheet
Starting with Stock 350 TPI
Parts to buy

Holley Stealth Ram
http://store.summitracing.com/partde...5&autoview=sku

BBK 58mm throttle body
http://store.summitracing.com/partde...5&autoview=sku

Fuel Rails
Professional Products 10608
http://www.professional-products.com/fuelrails.php

Rockers
http://store.summitracing.com/partde...6&autoview=sku


Lifters
http://store.summitracing.com/partde...art=CCA-875-16

Push Rods
http://store.summitracing.com/partde...rt=CCA-7808-16

Comp Cams
http://store.summitracing.com/partde...8&autoview=sku

AFR 195cc Aluminum Street Heads PN #1036 or #1038
http://airflowresearch.com/195sbc_sh.php

Hooker Headers 2055
http://store.summitracing.com/partde...0&autoview=sku

AFR Hydra-Rev
http://airflowresearch.com/hydra_rev.php

Rotating Assembly
?

Not sure as to what rotating assembly to go with just yet. I am just curious from others who have rebuilt engines to take a look at the parts and give any other suggestions to different parts to get or any major parts that I am missing that I might need. Fastener will more than likely be ARP. This will be my first engine build so any help from anyone is greatly appreciated.