Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

need help.....

Old Feb 10, 2009 | 10:25 PM
  #1  
rolly92cam's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2008
Posts: 11
Likes: 0
need help.....

ok so i bought a 91 z28, the guy said it has a 350 5.7 of a 89 iroc-z, but im not sure i toke it to the track an i hit a 14.9 but that dosent tell me much cause i havent done oil change, an i dont know how good the sparks, an wires how can i find out what it is, cause i want to buy some performance stuff, please help.
Reply
Old Feb 10, 2009 | 10:29 PM
  #2  
Stekman's Avatar
TGO Supporter
 
Joined: Jul 2003
Posts: 4,803
Likes: 2
From: Grand Rapids, MI
Car: Z28
Engine: Sb2.2 406
Transmission: Jerico 4 speed
Axle/Gears: Ford 9" 3.60
Re: need help.....

Welcome aboard.

Check the casting number on the back of the block, then take that number to http://www.mortec.com/castnum.htm and look it up. Will tell you pretty quick what it is. As for performance stuff, though, when it comes to getting bolted to the outside (like heads, headers, intake, etc), most stuff doesn't care if it's a 305 or 350. Bolt patters are the same.

Reply
Old Feb 10, 2009 | 10:46 PM
  #3  
rolly92cam's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2008
Posts: 11
Likes: 0
Re: need help.....

thanks man, im going to do that first thing tomorrow.i hope its a 5.7. p/s do u know if the
airfoil works.
Reply
Old Feb 10, 2009 | 11:17 PM
  #4  
Stekman's Avatar
TGO Supporter
 
Joined: Jul 2003
Posts: 4,803
Likes: 2
From: Grand Rapids, MI
Car: Z28
Engine: Sb2.2 406
Transmission: Jerico 4 speed
Axle/Gears: Ford 9" 3.60
Re: need help.....

On a stock motor, not worth it.
Reply
Old Feb 11, 2009 | 10:33 PM
  #5  
rolly92cam's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2008
Posts: 11
Likes: 0
Re: need help.....

well it has headers, 3.73, shift kit, an some new drag radials, what can i put to give it some good power.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
acerocks666
Tech / General Engine
1
Aug 24, 2014 07:37 PM
RichSmoke
Tech / General Engine
7
Aug 14, 2014 02:29 PM
niGhTcrAwler1
Engine/Drivetrain/Suspension Wanted
8
Jun 22, 2013 10:41 PM
beaner104
Body
19
Apr 17, 2013 05:55 AM
bert89
Electronics
8
Oct 31, 2005 11:10 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:42 AM.