Will LT4 springs work with my new cam?
Thread Starter
Senior Member
iTrader: (1)
Joined: Feb 2008
Posts: 805
Likes: 0
From: Waynesville ohio
Car: 1986 corvette Z51
Engine: L98
Transmission: doug nash 4+3 speed
Axle/Gears: 3:42 posi
Will LT4 springs work with my new cam?
Hey guys i found new set of LT4 springs and retainers but not sure if they will work with my cam?
Specs:
223/230 .540/.540 Lift 111 LSA
thanks
kevin
Specs:
223/230 .540/.540 Lift 111 LSA
thanks
kevin
Moderator
Joined: Jan 2000
Posts: 19,651
Likes: 309
Re: Will LT4 springs work with my new cam?
The question isn't whether they will work, but whether they will last. I'm running LT4 springs (12495494) with the titanium caps on 2.02/1.60 valves over a 07-306-8 (.510/.540) cam, and it has held together for 18,000 miles so far. You will have to install them no tighter than 1.78".
Thread Starter
Senior Member
iTrader: (1)
Joined: Feb 2008
Posts: 805
Likes: 0
From: Waynesville ohio
Car: 1986 corvette Z51
Engine: L98
Transmission: doug nash 4+3 speed
Axle/Gears: 3:42 posi
Re: Will LT4 springs work with my new cam?
So they can handle the lift?
thanks
kevin
thanks
kevin
Thread
Thread Starter
Forum
Replies
Last Post
1988iroc350tpi
Tech / General Engine
8
Aug 14, 2015 07:52 PM
