350 TPI and 350 TBI engine specs
Thread Starter
Junior Member
Joined: Feb 2010
Posts: 2
Likes: 0
350 TPI and 350 TBI engine specs
Hi all, new to the site. I've been reading quite a bit thru all the information on the board. I'm real familiar with the "old" 350 sbc, not the new fuel injection stuff. Does anyone know the specs of the stock TBI and TPI engines? Such as stock comp ratios, head cc's.
I have a cherry 1970 350 4 bolt main short block sitting here with 18k on it and wanted to use that for the build. I know i will need to use a retrofit kit for a roller cam that is computer friendly. What i'm trying to do is see which pistons, head combo to use to get near factory compression to bolt on the TPI injection system. I plan on using the FIRST TPI system.
Thanks in advance.
I have a cherry 1970 350 4 bolt main short block sitting here with 18k on it and wanted to use that for the build. I know i will need to use a retrofit kit for a roller cam that is computer friendly. What i'm trying to do is see which pistons, head combo to use to get near factory compression to bolt on the TPI injection system. I plan on using the FIRST TPI system.
Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
