Another head gasket recommendation ??
Thread Starter
Member
iTrader: (9)
Joined: Aug 2006
Posts: 216
Likes: 0
From: Los Angeles
Car: 88 Iroc-Z
Engine: 355 AFR-195 FIRST Fuel Inj.
Transmission: T56
Axle/Gears: ??
Another head gasket recommendation ??
I have a stock short block L98 from an 87 vette. I'm planning on putting some GMPP FastBurn heads but don't know much about selecting head gaskets. Any recommendations?
Thanks
Thanks
Joined: May 2005
Posts: 972
Likes: 11
From: Winnipeg, Manitoba. Canada
Car: 1989 T-Top GTA
Engine: 5.7L TPI> 6.2L
Transmission: 700R-4
Axle/Gears: 3.27
Re: Another head gasket recommendation ??
Depends what your looking for.
Common practice is to have a .040" quench (look it up)
What's your deck height?
Aluminum heads?
Flat-top pistons?
I've used Fel-Pro 1094 http://www.summitracing.com/parts/FPP-1094/
To Regain some compression on an engine with dished pistons....
5.7L
1987
Look it up.... educate yourself..... the choice is yours
http://www.summitracing.com/
Common practice is to have a .040" quench (look it up)
What's your deck height?
Aluminum heads?
Flat-top pistons?
I've used Fel-Pro 1094 http://www.summitracing.com/parts/FPP-1094/
To Regain some compression on an engine with dished pistons....
5.7L
1987
Look it up.... educate yourself..... the choice is yours
http://www.summitracing.com/
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
3rd gen money
Tech / General Engine
5
Sep 8, 2015 11:40 PM
355tpipickup
Tech / General Engine
49
Aug 27, 2015 08:13 AM
NinjaNife
Tech / General Engine
27
Aug 23, 2015 11:49 AM
